[Smithchris (Banned)]

before you all get retarded and tell me there is a search button, ive used it. any and all links i can find to a manual for a pm5 virtue board are dead, even the link on virtue's website doesnt work. does anyone know where i can find a good link, or just simply tell me what light is what mode?

[bunkerking_13]

I gotchu.

Programming LED Colors

With Dipswitch 2 in the on position, hold the trigger and turn the marker on. The LED will then cycle through a rainbow of colors and stop on yellow. Tapping the trigger will then toggle through the different programming modes:

Programming Mode: Color:

Firing Mode Yellow
Debounce Green
Ramp Activation Speed Red
Ramp Percentage Flickering Yellow
Dwell Flickering Green
Eye Sensitivity Flickering Red
AMB (Anti-Mechanical Bounce) Flashing Yellow
ABS (Anti-Bolt Stick) Flashing Green
Max Rate of Fire Flashing Red

[Smithchris (Banned)]

thank you, but that leads to another question. im new to paintball and the pm5 is my first gun. i only have a red and green led, no yellow. is there any easy way to tell the pm5 board from the virtue board?

[bunkerking_13]

If you only have red and yellow, then you have the Stock Board.

[pronking]

Originally Posted by bunkerking_13

If you only have red and yellow, then you have the Stock Board.

Ya someone lied to you, if you don't have extra colors either its stock or your not in programming mode

[Chuckles_031]

sounds like it's not in programming mode, red and green are usually for eyes on or off. what color is the board itself?