 |
08-10-2012, 11:04 PM
|
#1
|
|
|
Need Help Repairing 2011 Matrix Rail
I bought a 2011 Matrix Rail not too long ago as a backup marker. I've only used it a few times, and since I've had it I've had a few issues with the marker deciding not to work. The first time I found out that one of the o-rings that act as a seal for the hose going into the marker from the solenoid. This last time, however, I cannot find the problem. the marker will gas up, the battery is fresh, I turn the eyes off, pull the trigger, and..... nothing. no solenoid click, no small air leaks, nothing. ive checked to make sure the eyes are working, and they are. Does anyone have any clue what might be wrong and how to fix it?
Thank you so much in advance.
|
|
|
|
08-11-2012, 08:51 AM
|
#2
|
|
BSH University
Join Date: Jul 2005
Location: MD
|
Make sure there are no torn or pinched wires
|
|
|
|
|
08-11-2012, 08:47 PM
|
#3
|
|
Gun tech!
Join Date: Sep 2007
Location: N.C
|
Hey buddy, can you PM me, or get 5 post so i can PM U
|
|
|
|
|
08-12-2012, 12:17 AM
|
#4
|
|
|
Can you get PM's?
|
|
|
|
|
08-12-2012, 12:19 AM
|
#5
|
|
|
I've got yahoo messenger too. sehj1202 is the username
|
|
|
|
|
08-12-2012, 12:20 AM
|
#6
|
|
|
all the wires are good. i cannot figure this out for the life of me lol
|
|
|
|
|
08-12-2012, 12:26 AM
|
#7
|
|
|
I dont just like to make this assumption, but could it be a solenoid issue?
|
|
|
|
|
08-12-2012, 12:26 AM
|
#8
|
|
|
Aaaaaand this is 5. send me a PM, it wont let me PM you.
|
|
|
|
|
08-12-2012, 12:54 AM
|
#9
|
|
Gun tech!
Join Date: Sep 2007
Location: N.C
|
Quote:
Originally Posted by SEHJ1992
I dont just like to make this assumption, but could it be a solenoid issue?
|
It depends, you could have a short some where, or a bad connection, but if you dont hear your noid clicking even a little, then most likely it's the noid, I have parts to fix theses, I did pm you |
|
|
|
|
08-12-2012, 03:04 PM
|
#10
|
|
Gingerpointfive
|
Good luck. :-/
__________________
ON TARGET PAINTBALL GA
DIVINITY
PROUD EKK ELITE
|
|
|
|
|
08-13-2012, 07:02 PM
|
#11
|
|
|
check the mullinex connector that attaches at your board that powers the noid, either on of a few things has happened on the connector has detached or is starting to detach from the wiring , the wiring has somehow been pinched during it life so its not working propperly or the selnoid is just bad to begin with can happen if a partical or something passes through it.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
