Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 08-09-2012, 11:32 AM #1
Join Date: Mar 2012
TM-15 trigger problem?

Well I just got my board -ape- in yesterday and changed out the magnetic part for the trigger too. Trigger wasnt responding to my gun so I change it back to stock and again it didnt respond to my gun. w/ air or without.
please help?!
GotPho is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 08-09-2012, 12:25 PM #2
I push buttons
GhostJedai's Avatar
Join Date: Jun 2005
Location: Southern California
Annual Supporting Member
 has been a member for 10 years
GhostJedai is BST Trusted
GhostJedai is playing at Living Legends Dreaded
GhostJedai has achieved Level 4 in PbNation Pursuit
GhostJedai has achieved Level 5 in PbNation Pursuit
GhostJedai is Legendary
GhostJedai supports Empire
When you're saying it's "not responding," do you mean it's not firing? Is there paint in the barrel? Were you trying it with eyes on/off? Did you set the board up properly?
Christ Krew #17

GhostJedai is offline   Reply With Quote
Old 08-09-2012, 04:20 PM #3
Join Date: Mar 2012
Yeah I did everything right. Its just not shooting. I think its the trigger setting and I dont know how much I should turn it. =/
GotPho is offline   Reply With Quote
Old 08-13-2012, 06:34 PM #4
Join Date: Nov 2008
The trigger magnet for the APE board needs to be further down, inside the trigger. Assemble it without the trigger guard so it's easy to adjust, and only screw in enough so the magnet is close to the board. Gradually screw it further away from the board and test it each full turn until it starts to activate.

Alternatively you could loosen all the other screws, leave the magnet screw so the magnet is flush to the top and then once you know it's activating, screw the other ones tighter until you get the pull you want.

TheEnglishGuy is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump