Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-25-2012, 09:09 PM #1
firerz05
Death before dishonor
 
firerz05's Avatar
 
Join Date: Mar 2004
Location: New York
 has been a member for 10 years
firerz05 supports DLX Technology
Droid leaking.

My droid is currently dumping air from around the trigger frame area. In the stickies I've seen, they said to replace the back oring on the bolt(gold) might help, also replacing all the valve orings might help. I replaced those 4 orings(1 on the bolt, 3 on the valve) and it's still dumping air.

I thought it could be the regulator letting in too much air and it venting out but no matter how much air is coming in I still have this problem. Also it will fire while air is leaking out of the trigger area, if that helps any.
firerz05 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-25-2012, 09:19 PM #2
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
Can be a couple of things.

Power tube center oring
Crack in bolt
Manifold gaskets
Hpr set to high 120 psi Max
Noid venting.

Check these few things and let me know.
SHOOTNPOO is offline   Reply With Quote
Old 11-25-2012, 09:23 PM #3
firerz05
Death before dishonor
 
firerz05's Avatar
 
Join Date: Mar 2004
Location: New York
 has been a member for 10 years
firerz05 supports DLX Technology
Quote:
Originally Posted by SHOOTNPOO View Post
Can be a couple of things.

Power tube center oring
Crack in bolt
Manifold gaskets
Hpr set to high 120 psi Max
Noid venting.

Check these few things and let me know.
-Will check/ replace center power tube oring
-Did the blow test on the bolt. Seemed pretty solid.
- Had a buddy check the gasket under the noid. He claimed it was alright.
- Leaks regardless of the amount of air going in so I doubt it's venting

Input much appreciated though!
firerz05 is offline   Reply With Quote
Old 11-25-2012, 10:16 PM #4
Mark S.
CHOWDAH
 
Mark S.'s Avatar
 
Join Date: May 2009
Location: NH
Mark S. works for a Paintball manufacturer
Mark S. plays in the APPA D4 division
One more thing to check would be to remove the o-rings from the valve and check for a hairline crack in the valve (typically would be under where the o-rings sit).
Mark S. is offline   Reply With Quote
Old 11-26-2012, 08:35 AM #5
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
You are more than welcome to send into us to have the repair done.
If you feel the need and just cant figure it out we have the ability to take care of it for you.

Eric
SHOOTNPOO is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump