After having serviced multiple DP guns locally, I have decided to offer my services online. I am currently highly familiar with the G series and FXs, and have a good amount of experience with E1s, and am currently openly offering my services to these guns. I will be expanding my services to the REV-i, Threshold, and older Fusions as I gain experience with them (I will offer discounted rate for the first few customers of these guns to help me gain more experience, PM for details).
more to come, posting now to get this online
Right now I am offering the following services as a single, complete package:
Test fire the gun to see how it is shooting upon arrival.
Complete gun tear down
Remove all parts
Carefully & thoroughly clean all parts
Check o-rings for wear/damage
Replace worn/damaged o-rings as needed
Lube all appropriate o-rings with dow 33, 55, and/or tri-flow
Reassemble all parts
Post service test
Test fire gun for final check
This service includes reg and RAPS ASA clean/lube/rebuild. I can service many other brands of regs and ASAs, but this must be disclosed beforehand. I will do standard service on the solenoid at no extra cost; however this will only be upon request unless it shows signs of needing service.
I will offer this service for only $10 for the time being.
Here is how the process works:
We discuss via PM the issues of your gun. If you decide to send your gun to me, you will ship your gun via your preferred method, and include a return shipping label and payment with the package (or payment in paypal). I work on the gun as soon as reasonably possible. Once finished, I send the gun back via your packaging and return label. You receive your gun good as new! If I am unable to fix your gun after exploring all options, I will refund my fee.
Some notes as of this time:
I leave shipping to you to protect both parties. You are protected in choosing how to ship your gun (delivery conf, signature conf, etc.), knowing there is no excuse for me to not ship your gun back, knowing the gun will ship back to the right address, as well as knowing the tracking numbers both ways. Since this is the case, I will not be held liable for any shipping issues once I have proof I have received the gun and return shipped the gun. If I receive a gun without a return label, it will not be worked on or shipped back until a means of return shipping is provided. If you wish for me to ship it back at your cost, it will be shipped insured with ID required signature confirmation.
As of this time, I am working on building up inventory on parts, so any parts needing replaced (o-rings, eye wires, boards, etc.) must be shipped with the gun, or I can order for you for an additional cost/time.
If it is required for me to order a part that was received broken (I.E. board, solenoid, eye wire, etc.), and you refuse to pay for the replacement part, I will not refund my fee, but will still service the gun to my fullest abilities before returning it.
I can also offer 3rd party B/S/T services and do this work in between the transaction. PM for details.
Inventory of common replacement parts and all o-rings
Complete o-ring replacement service
Complete o-ring kits (includes solenoid)
MORE TO COME
If you have any questions, feel free to PM me. Thank you!