I know this isn't the gun fourm but I need to find someone in Arkansas that is good with 200-2001 led angels. The gun needed a new battery put one in and the charger light turns green like it is charging, but the gun will not turn on. If someone is close to conway I wouldn't mind driving so you could look at it.
i have the manual on my phone. but and i know how to charge it. but its when i turn it on it wont come on. i hoping to find someone in arkansas that knows about angels so they can look at it. i know it would be easier to find out the problem if someone was looking at it.
the lights came on with the old battery the little green one. then we changed the battery and we did it wrong. i left it charging all thro the night and the light on the charger was still red. then we redid the battery and now the light will turn green on the charger but when i go to turn on the gun nothing at all. no clicks no lights nothing. so i think the battery is ok since it seems to be charging. the wires on the gun do seem pretty old lik they could be replaced. but it looked liek the noid set had everything already done.
I think you fried the board man, since the battery was put in wrong.
Those guns were older and didn't have a REVERSE POLARITY DIODE installed, which basically doesn't let the battery charge if the battery is reversed. But by you putting it on the charger all night in reverse, if fried the board.
Kinda like putting the wrong terminals on a car battery.
Look around the nation you can take a stock pm7 or Pmd board from the non ul frame and make it work in most old led angels several guys have done so to make their guns PSP legal. Dr Strangelove is the person to talk to on most of this. Hope this helps. It also gives you a 9v conversion.