__________________ GT / EGO11's / AXE FOR SALE ONLY "All right then," said the Savage defiantly, "I'm claiming the right to be unhappy"
~John the Savage
"It's the decisions you make when you have no time to make them that defines who you are." ~ teh_masterer Only after disaster can we be resurrected. ~Tyler Durden
San Diego Pirates
Whenever a problem, just set the board to stock, clean and lube the LPR and HPR and BOLT (make sure you put it back together right - meaning the shim stack is correct , etc.) NAd put a brand new battery (name brand ) in and hook up an HPA , yea high pressure, tank in . & then if it doesnt work, its prob. the solonoid. As long as you run a gun stock and the o-rings are in decent condition, it will work, and if it doesnt , well then
i did have a similar problem the new colored o rings some times are too big and once you air up the gun they don't let the bolt move freely replace the number 17 o rings inside the can for some clear #17 or black #17 o rings make sure that you clean the groove before you install the new o rings that should solve the problem also use some sleek honey lube much better than the dye lube hope that helps!!remember #17 orange o rings!!