[626alex15]

Originally Posted by pbbuddy12

It's the bottom left. If you look close the jewel doesn't just say have word like rotors have. Looks like two to me. Also the nose seems to drop more then a normal rotor. Personally having a tricky time finding the body seem where a rotor splits. And like mentioned the lines seem the closest to the sneak peeks.

The bottom left looks like a Rotor. The badge looks exactly like a Rotor badge, the front looks distorted like he was moving when the picture was taken or something.

[liverlip]

The photo was taken with a Virtue Camera.

[MiniMaster423]

im saying its the hopper on the bottom right

[p8ntball1o1]

I'm not saying it's a hopper, but it's a hopper.

[AoSpades]

Originally Posted by MiniMaster423

im saying its the hopper on the bottom right

That's a torque

[randomdean100]

Originally Posted by VPB-ChristianW

Since we posted this on our Facebook page, I figured I'd let you all in on the action... any guesses as to what it is?

Does the left edge seem more pointed than the right? If so my guess is that it's a hopper. Virtue has been in the business of dealing with hoppers, you wouldn't usually see an asymmetrical placard like that on a mask, parts of whatever it is are definitely not shaped like any gun I have seen, and that rubber looking strip could be to keep a water tight seal on the top/bottom half. Not to mention the placard looks like it's on a curved surface, something that you would only usually see on a hopper or mask, on guns there is usually a flat milled area for them to rest.

[IronCityKidz]

"The Virtue Spire line is the culmination of all of our prior product development. The technologies used from our Virtue upgrades and products over the past few years are reflected in this new Virtue product line, codenamed Spire."

Gonna guess Hopper, like many others before me. Making upgrade boards for the rotors, halo's, velocity, and other hoppers. Also the rotor soft cycle arm internally, as well as the speedfeeds/crowns. They have great experience with so many products that it would makes sense to be one. I no longer play paintball or work in the industry anymore but I am very intrigued by what this will be and look like.

[Bonanoob]

It's going to be a hopper. Theres no way a mask has that big of a logo on it. I don't think Ive seen a mask with a large logo of that size like that on it.

[7paintball]

Has to be a hopper

[Stan6543]

It's a hopper

[liverlip]

This thread is starting to sound like a DISH commercial.

[Malitov]

I can't wait. Virtue usually makes decent stuff.

[CAOL_98]

I'm super betting it's a hoppergunmask!!! It's your all in one tool for paintball! You never have to worry about getting low on paint because you're lense frame is the hopper, and you literally just look to where you want to shoot! That would explain why the logo is so bulky and why the guy on the far right has such a big smile...that's not a hat on his head...but a loaded weapon of mass destructive power!

[Tomaconda]

Here's today's sneak peak into the Virtue Spire project!

Don't forget to sign up for a chance to become part of the Elite 5!

https://www.facebook.com/VirtuePaint...28953167177144

[Paint_hore]

Originally Posted by Tomaconda

Here's today's sneak peak into the Virtue Spire project!

Don't forget to sign up for a chance to become part of the Elite 5!

https://www.facebook.com/VirtuePaint...28953167177144

Ok, this is it for sure!

[VirtuePaintballMike]

^^

Well done.

[AoSpades]

[L_x]

If you flip that image 180degrees, it looks like the lower rear of a hopper, with the fin being the rip drive.

[soccerguy243]

if you rotate that image 90* clockwise it looks like the fins are there to open a lid.

[Sk8r_18]

its the hopper for the vapor

[plastic]

Originally Posted by Sk8r_18

its the hopper for the vapor

plot twist