Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-23-2012, 05:34 AM #1
sjuhl89
 
 
sjuhl89's Avatar
 
Join Date: Feb 2012
Location: Springfield, VA
sjuhl89 supports Pev's Paintball
sjuhl89 plays in the APPA D5 division
sjuhl89 has achieved Level 1 in PbNation Pursuit
sjuhl89 has achieved Level 2 in PbNation Pursuit
Asa

Does anyone ever have any issues with the 2 screws that attach the asa? Mine seem to come loose from time to time causing a "wiggle" with the setup. After a quick tightening everything is good to go, however after any sort of dive I usually have to tighten it again. Would some blue loctite be the solution here?
sjuhl89 is offline   Reply With Quote
Old 07-23-2012, 06:21 AM #2
recoil101
 
 
recoil101's Avatar
 
Join Date: Aug 2007
Location: Cape Town RSA
recoil101 owns a Planet Eclipse Ego
recoil101 owns a Planet Eclipse Etek
recoil101 is attending Decay of Nations VI
recoil101 supports DLX Technology
Use a tiny amount of loctite, or if you want to adjust it at some point, then use a bit of thread tape around the screws.
__________________
Sand/Chrome Luxe
Brown/Silver Macdev Militia Clone VX
Gloss Red NT
Blue/Gold Nexus Ego 06
recoil101 is offline   Reply With Quote
Old 07-23-2012, 09:42 AM #3
DriverJ
Death is Coming...
 
DriverJ's Avatar
 
Join Date: May 2006
Location: Minnesota
Annual Supporting Member
DriverJ is BST Legit
DriverJ owns a Planet Eclipse SLS
DriverJ owns a Planet Eclipse CSL
DriverJ owns a Planet Eclipse Geo
DriverJ owns a Planet Eclipse Ego
DriverJ owns a Planet Eclipse Lv1
DriverJ supports Team VICIOUS
even with a dab of loctite you should still be able to adjust them, as long as you pick the right one.
DriverJ is online now   Reply With Quote
Old 07-23-2012, 10:01 AM #4
gndmepyon
Nothing
 
gndmepyon's Avatar
 
Join Date: Aug 2003
Location: 801
 has been a member for 10 years
gndmepyon owns a Planet Eclipse Ego
gndmepyon owns a Planet Eclipse Ego
gndmepyon supports Team VICIOUS
Pull the screws out. Put a very small amount of Locktite across a few threads vertically. Let it cure for 24 hours then put the screws back in. Same basic principle that PE uses on the trigger screws.
gndmepyon is offline   Reply With Quote
Old 07-23-2012, 02:10 PM #5
recoil101
 
 
recoil101's Avatar
 
Join Date: Aug 2007
Location: Cape Town RSA
recoil101 owns a Planet Eclipse Ego
recoil101 owns a Planet Eclipse Etek
recoil101 is attending Decay of Nations VI
recoil101 supports DLX Technology
Quote:
Originally Posted by gndmepyon View Post
Pull the screws out. Put a very small amount of Locktite across a few threads vertically. Let it cure for 24 hours then put the screws back in. Same basic principle that PE uses on the trigger screws.
True, forgot about doing it like that.
__________________
Sand/Chrome Luxe
Brown/Silver Macdev Militia Clone VX
Gloss Red NT
Blue/Gold Nexus Ego 06
recoil101 is offline   Reply With Quote
Old 07-23-2012, 04:33 PM #6
sjuhl89
 
 
sjuhl89's Avatar
 
Join Date: Feb 2012
Location: Springfield, VA
sjuhl89 supports Pev's Paintball
sjuhl89 plays in the APPA D5 division
sjuhl89 has achieved Level 1 in PbNation Pursuit
sjuhl89 has achieved Level 2 in PbNation Pursuit
Thanks for the headsup on the trigger screws...my stop screw keeps creeping out as well. I'll have to do the same thing to it. Thanks everyone for the help!
sjuhl89 is offline   Reply With Quote
Old 07-26-2012, 10:09 AM #7
Grizz89
 
 
Grizz89's Avatar
 
Join Date: May 2012
Grizz89 owns a Planet Eclipse Etek
yea this issue is annoying. going to get some locktite now.
Grizz89 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump