Hey just got my gun back from dye. going to call them tomorrow just seeing if i could get some help here. Got it back from dye didnt mess with the hpr or lpr. put in the tank. turned on the asa, turned on the marker... nothing. it didnt shoot. turned my eyes off. didnt shoot.i put my ear to the marker i hear a leak from the top of the grip frame, i also hear the noid clicking not shooting though.
I take out the air turn off the marker, zero out both regs. while the marker is off and air is not in i turn out the hpr 3 turns and keep the lpr still zeroed. i put the air back in flip on the asa the bolt sticks forward. then i start to back out the lpr about 1 turn out the bolt goes back, so im thinking its going to work. around 1 and half turns out for the lpr i start to hear the leak again. the more i turn out the lpr the bigger the leak. so i zero out both regs and put the gun away.
i get home from playing and clean /relube the bolt. replace the boat sail oring, and try again. this time hpr 2.5 turns out lpr still zeroed. when i put air into the gun the bolt does not stick forward. i start turning out the lpr and the same thing happened. leaking around 1.5 turns out.
dwell was set at 22 the first time, i set it to 18 the second time. any input is appreciated thanks fellas
got it back from dye they replaced the solenoid. still leaks. same situation happens. it leaks alot but still fires when i open up the lpr. the hpr was at 4 turns out, the lpr was around 2 turns out gun was fully cycling. gun was still cycling at 1 1/2 turns out, just has a bad leak. doesnt sound like from the lpr i do not mind sending it back to dye but would rather try to fix it myself. since i want to play with it this weekend
here is a pic of the front of the solenoid. there was alot of lube, could that be causing the problem?
Here is a pic of the lpr adjusted all the way in, does it seem to far in?
Here is a pic of the lpr reg seat, does it look damaged?
Here is a link to video, i apologize but i found out the mic on my phone is out, so you will not be able to hear anything. but forward to 1:20 and pause the leak seems to be coming from wire the wire is touching the solenoid. thanks.
If there are any more pics or vids you need. let me know. Also have a vid of where the leak is coming from but i do not know how to embed the video