Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-06-2012, 12:06 PM #1
axe2011
 
 
axe2011's Avatar
 
Join Date: May 2011
PM6 leaking help!

I have a pm6 that sounds like its leaking down the barrel. I took the frame off and the leak seems to be coming from the back part of the solenoid where the black and red wires plug into the noid. All the bolt orings look great but I replaced the three big ones that go on the outside of the can anyway which didnt fix anything. The funny grid shaped oring that seals the solenoid seems to have one tiny spot in it where it is raised up and not flat. Could this be it? even though its is on the opposite side from where the leak is? Thoughts and comments are appreciated. Thanks!
axe2011 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-06-2012, 03:06 PM #2
speedy2k4
BSH University
 
speedy2k4's Avatar
 
Join Date: Jul 2005
Location: MD
speedy2k4 is a Supporting Member
Change the internal can o-ring, bolt sail o-ring, and internal tophat o-rings. See if the frame and barrel leaks stop.

Also check that your LPR/HPR pressures are set correctly.
speedy2k4 is offline   Reply With Quote
Old 07-11-2012, 10:51 PM #3
Extreme Pros
 
 
Extreme Pros's Avatar
 
Join Date: Jul 2011
Extreme Pros is an Ultimate field/store owner
Change out the bolt sail oring. That should be the other oring that causes a solenoid leak.
__________________
Extreme Pros Paintball
13352 Euclid Street
Garden Grove, CA 92843

714-638-8933
"Orange County's Premier Paintball Shop"
Follow us on Facebook "Extreme Pros Paintball"
www.extremeprospaintball.com
Extreme Pros is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump