Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-11-2004, 10:49 PM #22
daveczrn
Dr. Evil
 
Join Date: Aug 2002
Location: philadelphia
 has been a member for 10 years
FBM sells a clamping feedneck for the dragunfly
call Big E at 215-295-3830 on tuesday about 3pm est.
__________________


100% reason to remember the name
daveczrn is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-28-2004, 10:46 AM #23
Fonzie
 
 
Fonzie's Avatar
 
Join Date: Jun 2004
Location: Northwest
 has been a member for 10 years
I am currently trying to get my mech fly work keep popping hoses. during the time that it did work it was sweet. so I'm going to keep going till i get the hose thing figured then be happy once again. Why this cooment to let the rest of you guys know thqatt even thought you have question do not get discouraged just be patient. good luck to us all.
__________________
1 Lasoya Timmy with ups Egg/z board 72/4500 freak kit + Ion + Tippy A-5 e-grip Flatline 114ci nitro duck JCS stock red dot scope plus tons of goodies.

PBN feedback : http://www.pbnation.com/showthread.p...hreadid=562591
Ebay feedback : http://feedback.ebay.com/ws1/eBayISA...onzie&items=25
Fonzie is offline   Reply With Quote
Old 07-28-2004, 11:08 AM #24
Play4therush
 
 
Play4therush's Avatar
 
Join Date: Jun 2004
Location: So-Cal/ murrieta
Play4therush is a Supporting Member
 has been a member for 10 years
try some super glue on the hoses to hold them in place.
__________________
http://www.pbnation.com/showthread.p...light=feedback

57 POSITIVE FEEDBACK'S. ZERO NEGATIVE
Play4therush is offline   Reply With Quote
Old 08-03-2004, 10:29 PM #25
Moody6131
 
 
Join Date: Aug 2004
Location: Omaha, Nebraska
 has been a member for 10 years
Not Really a Upgrade question but I cant seem to get my cocking rod off I see the allan wrench at the tip but the allens they gave me dont fit it and so far the allen kits Ive tried dont, and I really pissed cause it works perfect out of the box but i cant play with 320 fps at my courses dont know why you guys didnt get it to work right out of the box by i just put air on it and it worked great. just need to be able to get at the velocity nob. any probs with yor mechs or help? Thanks
-Moody
Moody6131 is offline   Reply With Quote
Old 08-04-2004, 01:12 PM #26
M3frontman
www.ranjerzproshop.com
 
M3frontman's Avatar
 
Join Date: Mar 2004
 has been a member for 10 years
Moody, try lowering the reg pressure
__________________
"Originally posted by Straight 6 Glory: "Originally posted by Featherlite 07: holy **** you pwnt him so hard. That was one of the better ownings I have seen and I have seen many an owning in my day."
"Originally posted by Mmmmm..Viking: you owned the **** out of him.
it was glorious."

I see now, I see."
M3frontman is offline   Reply With Quote
Old 08-04-2004, 04:16 PM #27
Fonzie
 
 
Fonzie's Avatar
 
Join Date: Jun 2004
Location: Northwest
 has been a member for 10 years
I second that lower the regulator press. but if you must get it off use aluminum can cut up to cover the end of the rod bite donw on that and the end of the rod and go counter clockwise.
__________________
1 Lasoya Timmy with ups Egg/z board 72/4500 freak kit + Ion + Tippy A-5 e-grip Flatline 114ci nitro duck JCS stock red dot scope plus tons of goodies.

PBN feedback : http://www.pbnation.com/showthread.p...hreadid=562591
Ebay feedback : http://feedback.ebay.com/ws1/eBayISA...onzie&items=25
Fonzie is offline   Reply With Quote
Old 08-10-2004, 08:56 PM #28
Twmagoo
 
 
Join Date: Jul 2004
Location: Baton Rouge
 has been a member for 10 years
Moody I had the same thing..Just cock the block back then carefully get a pair of vise grips around the shaft of the cocking rod and break it loose. Although once you get the velcoity adjusted that way put your rod back in there about where it was or your marker may not cock back after a shot is made.

Easiest way is to slow bump your reg down a bit (don't just crank it down) fire then adjust again just little bit at a time until you are the FPS you need.

Oh if you do bend your rod shaft there about 15.00 to replace, just be careful and don't scratch your ano. like I did.
__________________
Remember to support your local paintball store and field. Play it safe and play it hard.
MCM Paintball 225-272-0101

http://www.myspace.com/twmagoo
Twmagoo is offline   Reply With Quote
Old 08-11-2004, 03:05 PM #29
Moody6131
 
 
Join Date: Aug 2004
Location: Omaha, Nebraska
 has been a member for 10 years
I went to my Pro shop and got it off and ya i had to adjust the cocking rod alot cause it wouldnt lock in, and now I need air to check it out. only problem is the reg is the chamber on the front block right? cause there is one that is used as the handle and that can be adjusted to and I missed with the one on the front and i dont have air and i dont know if it will bust when i put air on it so which way does lowering that reg go? I made the screw looser or towards the outside of the tip, I have a gauge so i can adjust when i put air on but when i put it on im afraid it will bust from pressure, confused manual sucks for mech.
Moody6131 is offline   Reply With Quote
Old 08-11-2004, 06:57 PM #30
Fonzie
 
 
Fonzie's Avatar
 
Join Date: Jun 2004
Location: Northwest
 has been a member for 10 years
Yes baking all the way out is the thing to do. once you get air and gas it it you willhear it gas up. make sure cocking rod is back. now when you pull the trigger it should do nothing. keep truning the screw in that you back out till you start to get action on the back block. just pull the trigger and eventually you will get there. once it strarts to move it back keep going till it has enough pressure to moveit all the way back to cock it. once you are there go 1/4 trun more and you are done. check moody paintball .com Click here they have a great article on how to time autococker it is the same as the WGP execpt the dragun is low pressure. hope this help good luck
__________________
1 Lasoya Timmy with ups Egg/z board 72/4500 freak kit + Ion + Tippy A-5 e-grip Flatline 114ci nitro duck JCS stock red dot scope plus tons of goodies.

PBN feedback : http://www.pbnation.com/showthread.p...hreadid=562591
Ebay feedback : http://feedback.ebay.com/ws1/eBayISA...onzie&items=25

Last edited by Fonzie : 08-11-2004 at 07:02 PM.
Fonzie is offline   Reply With Quote
Old 08-14-2004, 04:41 PM #31
FoxyGrandpa07
 
 
FoxyGrandpa07's Avatar
 
Join Date: Apr 2004
Location: Findlay, Ohio
 has been a member for 10 years
I bought a dragunfly LCD off of ebay about a month ago, When i recived it it didnt have any hoses or hose barbs on it like it should have. I noticed that wgp barbs are too small...where can i find hose barbs that will fit the dragunfly? Thanks!
__________________
Aim: FoxyGrandpa07
Email: FoxyGrandpa0777@hotmail.com
FoxyGrandpa07 is offline   Reply With Quote
Old 08-14-2004, 06:40 PM #32
crazyone
 
 
Join Date: Mar 2004
Location: Lisbon Me.
 has been a member for 10 years
dragun stuff

go to www.ogitv.com or do a search for odessy group international they are the people who market the guns
or you can contact a buddy of mine who is their biggest distributer he's at mcpro2@comcast.net hope this helps
crazyone is offline   Reply With Quote
Old 08-18-2004, 11:30 PM #33
Moody6131
 
 
Join Date: Aug 2004
Location: Omaha, Nebraska
 has been a member for 10 years
Lcd Frame

I have a Mech as some of you know, and I'm saving money cause I thought you could buy the stock lcd frame for the D-fly, will it fit onto my mech? and where do you get such a item and how much and what will it take to put on? like drilling or extra parts? I have a pro shop to put it together if I feel its a lil hard but I dont like that cause it take them a week just for simple things, and I really need this and want it.
Moody
Moody6131 is offline   Reply With Quote
Old 08-30-2004, 02:01 PM #34
Hisse
 
 
Hisse's Avatar
 
Join Date: Jul 2004
Location: coming to a 50 near you
 has been a member for 10 years
what upgrades can a new style dragunfly mech
Hisse is offline   Reply With Quote
Old 09-21-2004, 03:36 PM #35
lamborghini25
 
 
Join Date: Feb 2003
 has been a member for 10 years
I replaced my ram and ordered a new pump arm but it was too long. I used a CCM regular autococker pump arm but was too long and I wasn't successful in cutting it down.

Pump arms for the Dragunfly? Minicocker arms? I thought I had heard something about them working?

So do they? Thanks
lamborghini25 is offline   Reply With Quote
Old 09-21-2004, 05:50 PM #36
PimpedJT3.5
Brutal.
 
PimpedJT3.5's Avatar
 
Join Date: Apr 2004
Location: ::651::MN::
PimpedJT3.5 is a Supporting Member
 has been a member for 10 years
Minicocker arms, the fly IS a minicocker
PimpedJT3.5 is offline   Reply With Quote
Old 09-21-2004, 05:57 PM #37
Not a former member
Needs a team
 
Join Date: Sep 2003
Location: (Nor*859*Ken)
 has been a member for 10 years
Quote:
Originally posted by PimpedJT3.5
Minicocker arms, the fly IS a minicocker

note*


only the lcd and mech are mini... not the led
__________________
Get with the program strip to the slow jam slip on a Trojan kissin' the toes and move to the knees go back, repeat the job ain't done 'til you ruin the sheets
Not a former member is offline   Reply With Quote
Old 09-21-2004, 07:44 PM #38
PimpedJT3.5
Brutal.
 
PimpedJT3.5's Avatar
 
Join Date: Apr 2004
Location: ::651::MN::
PimpedJT3.5 is a Supporting Member
 has been a member for 10 years
Yes, true, but he has an lcd
PimpedJT3.5 is offline   Reply With Quote
Old 10-14-2004, 05:33 PM #39
eddie885221
SEXY DANCE!!!
 
eddie885221's Avatar
 
Join Date: Feb 2004
Location: sweet home alabama
 has been a member for 10 years
about how many shots does the mech get from a 68/3000 tank?
__________________
(\ /)
(0.0)
(> <)
copy bunny into your sig to help him achieve world domination
eddie885221 is offline   Reply With Quote
Old 10-21-2004, 07:25 PM #40
kwando
 
 
Join Date: Sep 2004
Location: Denver, CO
 has been a member for 10 years
i got my mech for $149.99 and it's getting here tomorrow. i also want to know where to get mods at. This is a great sticky
kwando is offline   Reply With Quote
Old 11-01-2004, 05:27 PM #41
mutated pig
 
 
mutated pig's Avatar
 
Join Date: Jul 2004
 has been a member for 10 years
mutated pig owns a Planet Eclipse Ego
mine chops... a lot. atleast once a game. could an anti chop bolt help this? or retiming it? or should i just sell it?!
__________________
feedback

Balls of Fury D5 CFOA

68/45 for sale

Damage DM13 F/S/T
mutated pig is offline   Reply With Quote
Old 11-01-2004, 08:14 PM #42
PimpedJT3.5
Brutal.
 
PimpedJT3.5's Avatar
 
Join Date: Apr 2004
Location: ::651::MN::
PimpedJT3.5 is a Supporting Member
 has been a member for 10 years
Retiming will help the most. It has to work. What is your dwell and presures? Just talk to me though pm's.
PimpedJT3.5 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump