Originally Posted by Rockstar!
I have the tech t Bolt. The spring is aligned properly, as for the poppit which part is that? I'm new to paintball
The poppet is the most important part of the Axe and must be cleaned and lubed very often. Whenever you clean your Axe you should clean and lube the poppet or you Axe will not perform properly.
The poppet is the brass piece with the white tip that sits inside the bolt guide.
To remove it, remove your bolt system. Unscrew the back cap completely and them push it out towards the back of the bolt guide with a small allen wrench. Be careful not to damage the bolt guide when removing the poppet.
You need to clean and lube that o-ring on your poppet. Keep the white seal clean and free of grease and dirt.
When your reinstall the poppet you should screw the back cap all the way in then back out 3/4 a turn if you are using a stock bolt at stock settings.