[pggp]

Just got my first egomag build completed!
Went with the etek2 frame, the SMC S070C-SDG-32 noid and the clippard MPA-3.
Venomous designs toxic rail
ULE body ( about to send off to get the hills eye mod)
Dangerous Power RAPS on/off
Palmers Pursuit Pebble LPR
Random Bob long empty hpr as a foregrip (for now)
Waiting for my local shop to get some nicer over 1ft pieces of macroline haha
Thanks to Hill for all the helpfull information on AO!
still have to do some tuning and figuring how to work with the lpr occasional creeping up but other than that it shoots great, even with no eyes and a cheap hopper!
ill have some videos up in the morning let me know what you think


Shot at 2012-06-04

[hill160881]

Looks great and real comfortable to shoot. Nice to see another one out there.

[inmylife2415]

Looks good man, are you using a blind screw to hold the valve in place? Looks like the screw from frame to rail doesn't line up with the valve.

[asfaraslogic]

Very nice build

[pggp]

No im using the back screw to hold the valve but I ran into the issue of it not hilding tight enough into the body since I think I drilled my hole in the frame a fraction of an inch to far back but since then ive milled the wing off the grip frame and adjusted the position and it works fine.

[GrAzIaNo]

try n hide the lpr...in the hollow hpr maybe or in the grip...make it look much cleaner and sexier

[pggp]

Yeah ive put alot of thought into it but thats much easier said than done, the pebble has some real size to it for an lpr. and im not sure if im into having the two macrolines on the gun versus the one like this. or also im not sure if i want to have as big of a foregrip on the gun that it would take to hide the lpr inside. Ive gotta lotta things to consider its definitely a work in progress.
anyone know someone with a cnc that would wanna tackle trying to make a custom part to take up the space between the gripframe and also have hpr threads to screw a foregrip into?

[inmylife2415]

You could use a hpr set real low instead of lpr, and Luke can help you with any automag milling you would need.

[pggp]

Yrah I saw a few that were set up that way and they look nice I was just wondering if they keeep a constant pressure or are there issues with it spiking. Also im not sure how to route the air from the vasa to the noid if you do it that way

[inmylife2415]

You could have pressure spikes with any pressure regulator, just gota maintain them. Check out my build thread of my egomag to see how to run the lines....you could tap a 10/32 on ur Va

http://www.pbnation.com/showthread.p...457&highlight=