[krazie805]

Well i have some consistency issues.. it was shooting +/- 5fps now it shoots about 20fps +/- i dont know why ive relubed it readjusted lpr hpr.. lubes those chronod fine then after on game + or - 20fps.. its a stock bolt and everything 2.3 board, lpr and hpr are drilled umm and thats about it.. gun has seen alot of paint though.. there is no color inside the gun all of the anodization got worn off by the bolt i do have a new solenoid sitting around havnt tryes that yet

[tacxplosion]

have you tried changing the bolt/pin o'rings? if they're too beat up they might be dragging or not sealing correctly.

[tlmiller]

did you rebuild the regs?

That's been the #1 culprit in my experience for massive consistency issues.

[krazie805]

Originally Posted by tacxplosion

have you tried changing the bolt/pin o'rings? if they're too beat up they might be dragging or not sealing correctly.

Havnt tried that but all the orings were replaced like 10 or 12 cases of paint ago lol.. ill give it a look

Originally Posted by tlmiller

did you rebuild the regs?

That's been the #1 culprit in my experience for massive consistency issues.

I just relubed the lpr today not the reg tho ill try that.. i cant chrono it until saturday and i play sunday

[tlmiller]

I would try that. When my 06 Quest was recently having these issues (amonst others) it was all down to both regs needing all new orings and lube. Had massive inconsistency and had issues with it sometimes leaking, turned out it was just my HPR needed new orings & lube. Once I did that (had rebuilt the LPR the week before due to creeping) it's been perfect since, and it's in much the same condition internally as you describe yours, that the anno has long since been worn off from use.

[krazie805]

Cool ima give it a try.. ima bring my cp reg to test also just incase thise is a 07 quest but its the 4th body made hopefully thats all it is..

Lubed the reg and changed the orings.. works great now also changed the orings on the back pin or whatever snatch pin thingy..