[pggp]

Hey,
So im building my first ego mag and im kinda just learning as I go I wanna just clear something up before I air it up for the first time. Im feeding the noid from a palmer pebble lpr,how should I got about setting that? Pressure all the way down, air it up and then increase until it cycles? Im just leary cuz I really dont wanna blow the noid and have to wait 3 more weeks for a nother to get shipped in. any help is appreciated!

[demented pumper]

yes i would do that turn slowly.

[inmylife2415]

what noid are you using? the best way to set the lpr is to indeed start at zero and turn till you get it to cycle, then give it another 1/4 turn

[renie]

Originally Posted by inmylife2415

what noid are you using? the best way to set the lpr is to indeed start at zero and turn till you get it to cycle, then give it another 1/4 turn

What he said

[pggp]

Im using the smc 32, thanks for all the help! Ima post some pics and vids up once I get her runnin

[pggp]

Okay so im having some issues now, I have everything together and the ram is operating, but when I air the gun up the sear becomes rock solid, I cant even push it back with my hand. What have I got wrong? I'm not real knowledgeable about how xvalves function but simething us definitly off. I have a video of the setup I will upload tomorrow

[demented pumper]

see if it will move with the ram removed. maybe there is not enough clearance for it to move.

[pggp]

Alright ill try that in the morning

[hill160881]

It sounds like a missing oring in the top of the on/off.

[pggp]

Demented was right I had to move my ram as far foward as I could possibly put it but I finally got it working! Now just need a fresh fill in the morning and I can tweak it a bit

[pggp]

Anyone else have the issue of the gun not cycling when the tank pressure is at 1000, its seems like 1000 psi is just barely getting me through a hopper, what kind of tanks did yall use with yours?

[renie]

it might be your bottle reg not giving out enough psi?

[inmylife2415]

Originally Posted by pggp

Anyone else have the issue of the gun not cycling when the tank pressure is at 1000, its seems like 1000 psi is just barely getting me through a hopper, what kind of tanks did yall use with yours?

thats not that uncommon. x valves are air hogs and need lots of pressure to cycle. i can take my tank off my egomag at about 800psi(no more cycles) and still get a hopper + with my shocker.

like renie said it could be your tank reg. what kind are you using?

[pggp]

Ah alright that makes me feel better, i was using a 48/3000 pure energy

[inmylife2415]

i would get a bigger tank and if your gona use the egomag often and also make sure its hp

[pggp]

Ah gotcha so 68/45 ish? Shoyldnt have just sold that dye throttle :/

[renie]

i run a 88 with a ninja reg works a treat

[demented pumper]

i run a 70/45 with a havoc reg or a crossfire

[inmylife2415]

I rock the 68/45 crossfire.....ninja and crossfire seem to be the most consistent HP tank regs