Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-14-2016, 08:25 PM #1
justmyluck3229
 
 
Join Date: Dec 2015
G6R can't bolt can't push the paintball until 2nd or 3rd pulling trigger

Hi All,
Thanks for any advice. I have purchase this G6R from e-bay and I have dry fired it with no issues. Low pressure is at 60 and High press is at around 153.
I have found out that the bolt can't push the paintball or Reball through the first trigger pull. It takes about 2 or 3 trigger pulls before it can fire and with the chron, it is at 280fps. I did checked out the marker and I found that the eyes were very dirty and I have clean them out but I am still having this issue with the bolt acting like it has very low pressure that it can't push the ball through the ball detents. Sometimes, the gun does fire with one trigger pull but most of the time, it takes 3 trigger pull to shoot. Any ideas? I have also increase the LP up to 70psi but that didn't work. Thanks for any help.
justmyluck3229 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-14-2016, 08:31 PM #2
gamer565
Read the manual!!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
 has been a member for 10 years
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
gamer565 supports Ninja Paintball
Replace the battery, and check the dwell setting.

Sounds like the solenoid is dirty or dying. You could take the solenoid apart and lube the spool.
gamer565 is offline   Reply With Quote
Old 02-15-2016, 09:52 PM #3
justmyluck3229
 
 
Join Date: Dec 2015
Thanks for the advice. I will check this out. I have purchase this gun from ebay to used as spare parts since I got 2 other new g6r that I am breaking in. Since this gun was suppose to be broken in already, I was about to let a friend use it.
justmyluck3229 is offline   Reply With Quote
Old 02-18-2016, 02:26 PM #4
S3f
 
 
Join Date: Jun 2013
rplance rear ram oring
S3f is offline   Reply With Quote
Old 02-23-2016, 09:52 AM #5
the trooper
former Moderator
 
the trooper's Avatar
 
Join Date: Dec 2003
Location: Myrtle Beach, SC
Annual Supporting Member
the trooper is a Supporting Member
 has been a member for 10 years
Pull the bolt out and see if it fires correctly. Had a new g6r do this and the bolt tip was put on too tight and caused it to mushroom.
the trooper is offline   Reply With Quote
Old 02-29-2016, 09:44 AM #6
Dailydriven09
I just want to Pew-Pew
 
Dailydriven09's Avatar
 
Join Date: Feb 2014
Location: Chicago, IL
Dailydriven09 is playing at Living Legends IX
Dailydriven09 plays in the APPA beginner division
Dailydriven09 supports Ninja Paintball
Rear ram oring. Had this problem last night, replaced it after tearing the whole gun apart, and voila
__________________
CPL MiLP #27
facebook.com/TheGentlemenPB


Originally Posted by rilessmiles23 View Post
oh ok.well i have a brass eagle. and i usually get at least 5 poeple out of 10games so i guess i am a d2
Dailydriven09 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump