Blowback Teching and Repair
The time has come for me to offer my services to the community of PbNation. I have been working on blowback markers for around five years, and I haven't met a single one I haven't been able to fix! I do all brands, from Spyders to Draguns, Viewloaders to Piranhas! I can fix any problem, from not recocking to a nonfunctioning electronic gripframe! Pricing is cheap compared to a pro shop!
-$10+shipping. This is the most basic service and includes replacement of all o-rings, cleaning of all parts-inside and out, and chronying and tuning of springs.
$15+shipping. Typically, I can fix about any problem you can throw my way, from a broken striker o-ring to a halved bolt or stripped screw. This includes a cleaning and tuning as well as the cost of any parts I have to throw in it.
$20+shipping. These are a bit more tricky, as most of the time it's an electronics problem rather than a mech problem. If your frame is fine, I'll only charge you for mechanical teching, however if the frame is to blame, I'll have a go at it at the fee of $20 and the cost of any parts.
$5-$25+shipping. I'll install any aftermarket bolt-on modification, provided by you or specified and purchased by you and delivered directly to me from wherever you bought it. I can also re-tap holes for gripframes in case you strip it out, remove stripped screws, and other such stuff. I'm not the guy to go to for milling, although I can do lathe work for you, such as slimming down your bolt or whatever.
For any other services not listed, contact me via PM! Thanks, and I hope you choose Wyka Airsmithing for all your airsmithing needs!
Colorado NighthawksGearbag Sale!
Rocking drop-forwards like they're going out of style...oh, wait...
Proud Pumper since 2011
Last edited by 2nwyka : 09-02-2012 at 01:05 AM.