Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 05-15-2012, 04:09 AM #1
Cool and Calm
nguyen4524's Avatar
Join Date: Jan 2012
Location: 3OH!3
nguyen4524 owns a Planet Eclipse Etek
nguyen4524 is for the Gunfight
nguyen4524 has achieved Level 1 in PbNation Pursuit
nguyen4524 has achieved Level 2 in PbNation Pursuit
Bolt isn't staying in place?

So I have a friend who recently bought an infinity legend for cheap, and it was working well when we shot it. Took it back sat around, and now when we try to shoot it, the bolt shoots for a few shots, but when I walk the trigger its like the bolt pin falls out of place and it can no longer shoot? I maintained almost everything so I'm not sure what's going on, and help would be appreciated, thanks!
nguyen4524 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 05-15-2012, 03:45 PM #2
What Would W Do
DeadOnpBaller51's Avatar
Join Date: Feb 2006
 has been a member for 10 years
DeadOnpBaller51 plays in the PSP
DeadOnpBaller51 is an NCPA National Champion
Try tightening the set screw on the back of the bolt. That should do a better job of holding the bolt pin in place.

Also, make sure the bolt pin isn't in backwards.
DeadOnpBaller51 is offline   Reply With Quote
Old 05-15-2012, 09:06 PM #3
vnandez's Avatar
Join Date: Jan 2009
Location: New York
vnandez has achieved Level 2 in PbNation Pursuit
^^This^^. Also, try adding some oil to the ball bearing in the bolt and work it in with the pin. Had the same issue with mine.
'To look behind or to look upfront is not as important as to look inside.' - Randolf Waldo Emerson
vnandez is offline   Reply With Quote
Old 05-18-2012, 11:53 AM #4
Bafinity Options!
killer_ghost's Avatar
Join Date: Jul 2006
Location: PR
 has been a member for 10 years
killer_ghost supports Ninja Paintball
If its a v2 bolt it doesn't have a screw in the back. You can try putting a cloth over the bolt pin and tapping it a few times with a screwdriver so it fits snug into the bolt.
Houston Heat Fan #15
killer_ghost is offline   Reply With Quote
Old 05-23-2012, 04:34 PM #5
free paint
emerluvinpb!'s Avatar
Join Date: Sep 2006
 has been a member for 10 years
possibly your spring. make sure your pin sits proper on the ram
emerluvinpb! is offline   Reply With Quote
Old 05-24-2012, 12:05 PM #6
Join Date: Dec 2008
g1141 works for a Paintball manufacturer
First make sure your pin in the slot on your ram.
If it is.
Take a file and file down the bottom edges of your pin.
It most likely has a burr on it that is keeping it from going all the way into the ram.

Infinity Paintball
g1141 is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump