Originally Posted by scootz
same here. i always change them out before the hit the 50% mark.. ill let it drain a bit next time before i change them... or maybe the boys at macdev could send me a noid, just to be on the safe side
a batch of high drain noids? Would we be able to test this anyway? The way I see it is this, a high drain noid probably means its internal resistance is lower. Same voltage, lower resistance --> higher current drain.
James, care to chip in on what the specs are suppose to be? Or what we should expect on a new 9v? A new Duracell starts at about 9.4 for me, and after a case, its drained down to about 8.8v