[Denniswil]

I tried to search for the reason why the gun won't shoot but am unlucky. Ok here is the problem that I have come accross. I can air up the gun and it doesn't leak but the gun doesn't fire either. Battery is new and board works with eyes on and off. When i take the take off a bit of air comes out from the asa. There is still pressure left in the chamber where the bolt is cause I tried removing the bolt and air came out once the back cap was unscrewed. Any thoughts of why the gun will not fire?

[BonesJackson]

Take the air off the gun. Turn the gun on and turn the eyes off if you have them. Pull the trigger. Does the gun make a quiet but audible 'click' sound?

[Denniswil]

I have heard a quiet 'click'

[anthrax4dinner]

wen u screwd in the bolt,,,,did u screw it in all the way and then back off 1/2 rotations...air it up and look down the feed neck is the bolt forward if so degas and screw bolt in all the way and then 1/2 screw out...mine does this same thing....

[BonesJackson]

Solenoid is clicking. My guess is it's a problem with your regs.

[gwhetzler]

LPR I bet.

[Denniswil]

hmm i'll have to check in to it all, i only backed the bolt 1/4 turn since one of the local techs said that is all i need to do. Might just need a total rebuild.

[MaToCa]

when you hear the click, is it the solenoid or the micro switch? Do you know how to tall the difference?

[Denniswil]

looks likemy brother took my gun to get it fixed, turns out battery wasn't new and needed change of a couple o-rings.