So this is the project we have been working on at the shop. We got this body in years ago and were told it was junk...well it wasn't and i convinced Jared to finally mill it for me. There are a bunch of little things we tried on this that we have not done before, we figure if we killed a body at least it was mine and not a customer gun.
The body alone came out to 9 3/8 oz...i was shooting for 8, but the only way to make it lighter is to mill off what makes it a stream line so that was vetoed...but what we did do is mill off some of the Tube that holds the reg...we took a 1/4 inch out of ...if you look it makes a big difference up front...this is the first one tried at the shop..if you mess this up, the gun is junk
I convinced J to take a little more out of the underside of the gun than he normally does on customer guns...well it was more like badgered but hey it worked
A little custom touch on the back...if we could have added the word Dummy it would have been more fitting
Here you see we did some milling on the reg to make another custom touch, i also completely smoothed the front of the UL frame and the thin tray
And Last the obligatory Butt Crack shot
The Color is going to be a Dark Blue, almost Black Dust with Clear Accents
I'll post some pics when it gets back from anno