[SithKnightBB]

No issues with Ken here. Called me back to make sure I wasn't having issues after fixing me up.

[p8ntballr68059]

i need to call him when i get this damn barrel kit sold or something so i can get the new bolt and a damn trigger cuz this one is ugly haha but damn this gun shoots nice.. maybe i should just find a barrel with the gold color tip to match

[C-Kidder]

my trigger is jumpy as hell anybody else have that issue? I can get the trigger to trip the solenoid multiple times without releasing the switch.

[p8ntballr68059]

ive not seen that issue..yet but i have only had mine for a short time.. i would say lengthen your pull and give yourself a better stop screw position so it doesn't get that deep into the micro switch.. also make sure there is no side to side slop

[Bushwood Bill]

Originally Posted by C-Kidder

my trigger is jumpy as hell anybody else have that issue? I can get the trigger to trip the solenoid multiple times without releasing the switch.

There have been a few others with crazy bounce. Just needs board adjustment to get rid of it.

[p8ntballr68059]

if it happens what do i need to adjust

[Bushwood Bill]

Originally Posted by p8ntballr68059

if it happens what do i need to adjust

I'm at work and don't have the board settings in front of me. I will check when I get home and post it.

[p8ntballr68059]

that would be awesome so i can be informed and have the knowledge in my head if i ever encounter it

[C-Kidder]

ya would like to know I bumped up the teal setting but it didn't seem to help i thought that one was the debounce but I could be wrong

[Dedloc]

Whew, finally finished reading this entire thread after starting this morning. Just traded off my 2011 G6R for a LNIB ZR1.5 with a shiv kit. I have been thinking a long time about getting one of these and finally decided to do it. After reading all the messages in this thread, I am very excited to have it (especially since i have always preferred spoolies over poppits). I am also very comforted knowing there are quite a few knowledgeable people in this thread that can help me should the need arise. Looking forward to joining the family.

[Bushwood Bill]

Originally Posted by Dedloc

Whew, finally finished reading this entire thread after starting this morning. Just traded off my 2011 G6R for a LNIB ZR1.5 with a shiv kit. I have been thinking a long time about getting one of these and finally decided to do it. After reading all the messages in this thread, I am very excited to have it (especially since i have always preferred spoolies over poppits). I am also very comforted knowing there are quite a few knowledgeable people in this thread that can help me should the need arise. Looking forward to joining the family.

Welcome to the ZR1 family! The ZR1 is a fairly simple gun that is very easy to maintain. In stock form (with stock reg/Asa) just make sure to use a lp tank and you should be good to go. Any problems just give me a shout!!

[SithKnightBB]

Originally Posted by Dedloc

Whew, finally finished reading this entire thread after starting this morning. Just traded off my 2011 G6R for a LNIB ZR1.5 with a shiv kit. I have been thinking a long time about getting one of these and finally decided to do it. After reading all the messages in this thread, I am very excited to have it (especially since i have always preferred spoolies over poppits). I am also very comforted knowing there are quite a few knowledgeable people in this thread that can help me should the need arise. Looking forward to joining the family.

I have both a G6R and ZR1. Can't go wrong either way. What isn't mentioned a lot is the ZR1 has great ergonomics, very comfortable to hold!
You shouldn't have any issues (unless you're like me and only have tanks where the bonnets bypass your hpr, oh well now I really know how to tech my gun though!)

[p8ntballr68059]

yea bill is the bomb digity when it comes to helping .. well except he didn't give the stuff for the stock board setting to stop the crazy bouncing... i have the ape oled so it is great no problems here.. but if i ever put stock back in i wanna know

[Bushwood Bill]

Originally Posted by p8ntballr68059

yea bill is the bomb digity when it comes to helping .. well except he didn't give the stuff for the stock board setting to stop the crazy bouncing... i have the ape oled so it is great no problems here.. but if i ever put stock back in i wanna know

Lol. I have the board settings at my desk at home and I will post as soon as walk in the door!!

[Dedloc]

Well mine should arrive tomorrow. Dust Silver body with gloss blue frame and accents. Very excited.

Owners pic:

[p8ntballr68059]

that looks pretty good man...

[Bushwood Bill]

OK! Anyone having severe bounce issues adjust bounce and AMB up 2ms at a time until you have no more bounce issues. I can't give you a exact setting but mine is bounce 2ms above stock and AMB 6ms above stock. The board settings are on the Zodiac website in the forums then click tech/manual..

[p8ntballr68059]

yay good for you Bill.. im just glad i have the ape board and i don't really have that problem

[BigEvil-AO]

Originally Posted by Bushwood Bill

OK! Anyone having severe bounce issues adjust bounce and AMB up 2ms at a time until you have no more bounce issues. I can't give you a exact setting but mine is bounce 2ms above stock and AMB 6ms above stock. The board settings are on the Zodiac website in the forums then click tech/manual..

Im having tons of bounce issues. Thanks for the tip.

[Bushwood Bill]

Originally Posted by BigEvil-AO

Im having tons of bounce issues. Thanks for the tip.

No problem!

[Dedloc]

Questions about the universal rail. 1. How do i remove the reg/asa to put it on? 2. Am i right in assuming i have to get another adapter of some type to attach to the rail and then to the asa since i see no way the universal rail will lock an asa in place?