[IThat_GuyI]

I was replacing the LP Hose in a beat up Wrath LTD and a brass elbow fitting on the LP Valve broke off. I may be able to salvage the LP Valve, but I need to figure out the specifications of the brass elbow fitting and where I could possibly acquire one.

Any help would be greatly appreciated.

[tacxplosion]

ion elbows work, should be 10-32 thread

[IThat_GuyI]

That seems large for the brass elbow barb. Thank you for your help though!

To clarify, I'm not looking for the ASA to HPR elbows. It's the internal barb fittings on the LP Valve of the solenoid.

[tacxplosion]

Oh, thought it was the LPR elbow, the 'noid elbows are M3 threaded, same as timmy barbs.

[IThat_GuyI]

Excellent. Hopefully I can find a replacement one now. Seems to be difficult to find.

Beswick Engineering has exactly what I'm looking for, but that's a bulk order site for businesses. LINK

Last resort would be to just JB Weld what's left of the old fitting, but I don't want to do that if I don't have to...

[tacxplosion]

http://www.airsoldier.com/mm5/mercha..._Code=FITTINGS

http://palmer-pursuit.com/cart/index... oducts_id=89

[Spaz 419]

u should be able to get m3 i think at hardware stores.

[IThat_GuyI]

Originally Posted by tacxplosion

http://www.airsoldier.com/mm5/mercha..._Code=FITTINGS

http://palmer-pursuit.com/cart/index... oducts_id=89

Ladies and Gentlemen, this user is a life saver.