Originally Posted by theblindchicken
Do you mean that it will only fire air with the firebolt/ no QEV or do you mean with the L7/QEV?
Is your loader also able to feed fast enough?
You should pull off the QEV and put on the stock banjo to see if the QEV is causing the issue. I'm assuming either your QEV is somehow malfunctioning or your board settings are incorrect for your set up, therefore not operating correctly. If it fires normally with the L7 bolt and the stock banjo, then you should switch your settings around with the QEV.
Your dwell appears to be in the correct area, but you may need to increase your ROF delay.
What settings do u suggest???