yea I did. I'll take a look at the gun soon and see if I can figure it out. Maybe that battery just sucked but i'm almost positive it was new when I first started to screw with the gun. The gun has been sitting in a closet since 04 so I figure it just needs a good cleaning.
Also, the button is really hard to turn on. I usually have to use a key to push it in hard enough to turn on. Kinda sucks, but I think I just need to open it up and make sure it seated properly on the board.
Black SFT, a friend had it sitting in his closet so he just gave it to me. I put a Dynasty NXT Bolt Guide and HE Bolt in it. Was cleaned by a friend and shooting great, but last time I went to use it the gun had this cycling problem. I think it's the reg, cause the noid seems fine. He's going to put a blackheart board in it soon. I'm going out of town this weekend, hopefully I can get a chance to get it from him and check it out next week.
He was just going to throw in a Blackheart I think, i'm sure the NOX board is way better though. This is the only Shocker i've ever had problems with. Want it to be my backup. Need to get the power button set right cause it's a ***** to turn on right now.
For the power button, loosen the frame screws and push it forward. Then tighten the screws back down.
Assumption is the mother of all **** ups.
"Thats a lot of Romans over there." "Yes but not one of them is Gisgo." Hannibal Barca and general Gisgo before the battle of Cannae in 216 BC.