[2nwyka]

Hey!
I recently acquired a pair of ER-2s to mess around with and play on my property (we don't have a place that fills CO2 up here, but 12ies are pretty cheap at the local Wal-Mart!). I was going to attempt to "Hitman mod" one of them so I can have a vertical foregrip. I know the cocking pressure is fairly heavy, so the standard steel wire wouldn't work without bending every shot. Any suggestions on techniques, materials, and such?
Noah

[JTfxConcept_fan]

I would try some type of shank style bolt that has some type of threading on the end to mount up into the handle..then use some washers and locking nut to give it stability. If the bolt is to thin to or if the hex head end is in the way you can then add a sleeve over the shank to be more smoother. BTW I did see Kee made a revision to the pump handle at some point. Look at a image search and you will see what i mean.

[Pntblr55]

One of my friends actually did this with one of his..... Took the pump handle off drilled a hole in it and put a srew bolt tyoe thing lol forget and put washers all the way down it.... Thing works great and is hela fun to shoot

[joshmeldin9]

Tis true pntblr55 I did. If you want help pm me.