 |
03-20-2012, 09:44 AM
|
#1
|
|
Join Date: Oct 2004
Location: Connecticut
|
PM5 Ultralight Frame Eyes
Hey guys I haven't been in the game in a number of years. I was to busy spending my money else where. But things have changed and I've taken my gun out of hiding. I need eyes for my ultralight frame. Is there any aftermarket eyes out there right now for my baby? Also what's the deal with the hoppers out now? Will my hopper suffice? I would like to get one of those hoppers soon though with the speed feeder.
__________________
'05 Proto Matrix • AKA 2 Liter + • STD JDS LPR • DYE Ultralite Frame • CCM No-Pro Feedneck • Stiffi Barrel • Hater Sauce • 45/4500 MacDev Conquest • Reloader B w/ Dual 9v's
Feedback
http://www.pbnation.com/showthread.php?t=742137
|
|
|
03-20-2012, 12:32 PM
|
#2
|
|
SKNasty. Cole World.
Join Date: Jan 2006
Location: nine*eight*nine
|
Virtue makes eyes, Erayser here on the nation makes custom laser eyes. You might have a hard time for a PM5, but def. check the BST, and make a WTB thread. Well there are new loaders like the rotor and the prophecy, but since the BPS of leagues is now even slower, your Reloader B is still plenty fast. I mean its faster than most of the current loaders.
|
|
|
03-20-2012, 06:59 PM
|
#3
|
|
I crack myself up!
Join Date: Dec 2008
Location: the 847
|
they are out there, just have to find them.
To be honest, IF you are going to keep the marker, then go with the wired eyes, and you should be good to go.
make sure your board has the plug in for the wired eyes however, some do and some don't.
Also, what hopper do you have, most likely it's going to be okay, but until you say what it is, nobody can say if it's any good or not.
|
|
|
03-21-2012, 09:10 AM
|
#4
|
|
Join Date: Oct 2004
Location: Connecticut
|
Quote:
Originally Posted by mymutter
they are out there, just have to find them.
To be honest, IF you are going to keep the marker, then go with the wired eyes, and you should be good to go.
make sure your board has the plug in for the wired eyes however, some do and some don't.
Also, what hopper do you have, most likely it's going to be okay, but until you say what it is, nobody can say if it's any good or not.
|
I have a reloader b. I purchased the ul frame when it first came out for the 05s. Now when I get home today and check my board what exactly am I looking for? I hate the ribbon eyes and when I was playing I shot with out eyes for a bit without any problems but I have the money so why not get them just to insure I have a good day on the field.
__________________
'05 Proto Matrix • AKA 2 Liter + • STD JDS LPR • DYE Ultralite Frame • CCM No-Pro Feedneck • Stiffi Barrel • Hater Sauce • 45/4500 MacDev Conquest • Reloader B w/ Dual 9v's
Feedback
http://www.pbnation.com/showthread.php?t=742137
|
|
|
03-21-2012, 10:10 AM
|
#5
|
|
SKNasty. Cole World.
Join Date: Jan 2006
Location: nine*eight*nine
|
Its a white port with 3-4 pins sticking out.
|
|
|
03-21-2012, 08:49 PM
|
#6
|
|
I crack myself up!
Join Date: Dec 2008
Location: the 847
|
on your board nothing will be plugged into it, but it will look like a white molex plug and have 4 pins in it.
My personal idea is don't bother, yeah, eyes are nice, but not really needed on a proto for under 15bps, and the reloader B is fine for what you are doing. Make sure to run it on the 6 batteries and not the 4 battery pack to make sure it's up to speed however.
you can get cheap reloader b2 boards and I would recommend upgrading to that board instead of getting eyes, honestly makes an improvement.
|
|
|
03-24-2012, 09:18 PM
|
#7
|
|
Join Date: Oct 2004
Location: Connecticut
|
There's a white 5 pin plug right below the red board settings switches would this be where I could connect DM wired eyes to? I believe it is 5 pins and not 4 I looked at it earlier today. I'd rather just get some eyes than get a new board for my hopper. I've anything I'd just get a new hopper instead of just upgrading the board. Taking apart the reloader b is a pain I'm sure with these new hoppers it's a bit easier.
__________________
'05 Proto Matrix • AKA 2 Liter + • STD JDS LPR • DYE Ultralite Frame • CCM No-Pro Feedneck • Stiffi Barrel • Hater Sauce • 45/4500 MacDev Conquest • Reloader B w/ Dual 9v's
Feedback
http://www.pbnation.com/showthread.php?t=742137
|
|
|
04-04-2012, 10:12 PM
|
#8
|
|
Join Date: Apr 2012
Location: ontario
|
Can you still find stuff for the year 09?
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|