Originally Posted by royalcheese123
alright so i have another concern, i brought it out to the field last saterday and it was everywhere on fps it would go as low as 110 and as high as 360ish area and no matter what i did with the reg is would do the same thing, i am very confused on this matter and dont quite know how to fix it properly. any help?
are you using a barrel kit? make sure your paint isnt rolling halfway down the barrel, that will cause crazy in-consistancy. cockers are closed bolt guns, so the only thing keeping the ball rolling down the barrel is the paint to bore match, the detent just prevents double feeds. if you dont have a barrel kit a little bit of tape on the inside of the barrel will keep it from happening.
and the general sweetspot is with the ivg about 2-3 threads then adjust the hpr to the desired fps, fine tune to your liking from there. lpr needs to be just high enough to cock the gun reliably since thats all it does, it doesnt affect velocity like it would on an ego or timmy.