Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-11-2012, 03:04 PM #1
NastE-imp
 
 
NastE-imp's Avatar
 
Join Date: Jan 2012
Location: On a boat
NastE-imp has achieved Level 1 in PbNation Pursuit
I seek the wisdom of fellow 09 owners!!! S.o.S

My first question is about the regulators, I suspect the gun is climbing in pressure, as I slightly turn the the hpr on, and it leaks out the front valve..When I press my finger on the front cap hole, either
A. A seal will catch, and the pressure would build up intensely(with a light turn of the hpr mind you), the longer I hold my finger the more pressure it would build up
B. seal doesn't catch, and you hear the valve core humming do to the high pressure passing through its seal... And it will also start slowly leaking out the grip frame, but I also imagine this is due to over-pressurization

So as I wait to get a snap ring plier to fully inspect the regs, I noticed the piston won't stay inside the lpr housing, it will click back in, but it feels like the spring is pushing it back out.. Is this spring pressure correct? Or should the piston sit in the reg like the hpr's... I suspect that this may be the problem for the climb in pressure

Any 09'ers have any suggestion's??
*and not going to lie, I love GOG. BUT I have heard of nightmare repair stories, so this explains me trying to tackle the problem, cause if anybody is breaking this gun, it's gonna be me!!! Haha
__________________
Paintball Barn

NastE-imp is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-12-2012, 09:51 AM #2
NastE-imp
 
 
NastE-imp's Avatar
 
Join Date: Jan 2012
Location: On a boat
NastE-imp has achieved Level 1 in PbNation Pursuit
Does anybody know any smartparts tech's who would appreciate the impulse's "delicate curve's" and put their magic touch on the gun
__________________
Paintball Barn

NastE-imp is offline   Reply With Quote
Old 03-12-2012, 01:16 PM #3
AndrewTheWookie
Disciple of the dark side
 
AndrewTheWookie's Avatar
 
Join Date: Jan 2010
Location: Central Coast, CA
AndrewTheWookie is playing at Living Legends V
AndrewTheWookie is playing at Living Legends VI
AndrewTheWookie is playing at Living Legends VII
IIRC, the last time I took apart mine the LPR piston wouldn't sit flush either, and wanted to push out of its housing until I put it back in the gripframe, so I think that's fine.
__________________
"When in doubt, just use C4"

WTB Chameleon .50 cal Freak kit
AndrewTheWookie is offline   Reply With Quote
Old 03-12-2012, 01:51 PM #4
NastE-imp
 
 
NastE-imp's Avatar
 
Join Date: Jan 2012
Location: On a boat
NastE-imp has achieved Level 1 in PbNation Pursuit
Thanks for your input, that's good to know!!!
Now if I could just figure this climb in pressure deal...
__________________
Paintball Barn

NastE-imp is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump