stock board question

FCMEDIC · 03-09-2012, 06:44 PM

I read the sticky on the boards but really didn't understand. got a b2k4, the board that is in my gun says ICD9300 rev3. It doesn't have a removable jumper, how or can you adjust the settings on this board?

ICdzBuff · 03-09-2012, 06:49 PM

The settings are non adjustable. It's just on or off haha

FCMEDIC · 03-09-2012, 08:27 PM

what board would be suggested for someone thinking about getting into the local tournament scene?

Nobody609 · 03-09-2012, 08:35 PM

if you can find a Chaos, or Nox, those 2 boards are adjustable, but as of right now, the only board you can buy new is a Kila Promaster/Freestyle board. the only thing is that you a microswitch on the board, so any extra movement could trip the switch, unless you disable it. some people don't like it but i like them.

ICdzBuff · 03-09-2012, 11:41 PM

The Kila is the only "drop in" board that is tourney legal. If you're feeling fancy, you can run a bushmaster of a cyborg board, with a custom harness. But that takes a bit more time and effort.

FCMEDIC · 03-10-2012, 08:04 AM

I'm just looking for some options with this b2k, I will proably be using the b2k as a backup gun if I can get it up an running properly. My drop/asa should be here today so I'll either be posting in the forsale section or asking more questions about the gun to get her running top notch. Here are some of the things/upgrades I plan to do to the gun if I can get the leak to stop. New barrell kit, clamping feedneck, Kila board, i'm sure there is some other things that I'm not thinking of right now. I've got faith that the gun will work properly, I have both adjustment screws backed out to zero. Fingers crossed that this thing works.