Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-23-2012, 08:20 PM #1
Dilly0509
 
 
Dilly0509's Avatar
 
Join Date: Jan 2012
Location: Indiana
Dilly0509 has achieved Level 1 in PbNation Pursuit
A4 Bolt?

Hey guys anyone know where i can buy a bolt that would work for an angel a4? Ive found a few online that look like it but i don't have it with me to be able to tell for sure. Thanks
Dilly0509 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-23-2012, 09:00 PM #2
dr.strangelove
The Angel Eye Doctor
 
dr.strangelove's Avatar
 
Join Date: May 2003
Location: Earth
 has been a member for 10 years
If it helps, anything from the Speed, A4, A4 Fly or 05 Speed will fit in your gun. Technically LCD and IR3 bolts will work as well, but the exhaust hole is smaller so you will experience some air loss. Also, if you are using Sensi DO NOT use an LCD bolt - it will destroy the Sensi rod.

I don't know of anyone retailing the soft face bolt, but you might be able to find an aftermarket from one of those generations that will work for you.
dr.strangelove is offline   Reply With Quote
Old 02-25-2012, 09:14 PM #3
Dilly0509
 
 
Dilly0509's Avatar
 
Join Date: Jan 2012
Location: Indiana
Dilly0509 has achieved Level 1 in PbNation Pursuit
Hey thanks Doc!
I looked around and still not too sure what to get. This one i found on ANS look an awful lot like mine but being that its all at FMA i can't really compare. You think this one i found would work. I know it says G7 but thought id ask. Thanks again!
http://www.ansgear.com/Angel_G7_Bolt...ngelboltg7.htm
Dilly0509 is offline   Reply With Quote
Old 02-25-2012, 09:38 PM #4
dr.strangelove
The Angel Eye Doctor
 
dr.strangelove's Avatar
 
Join Date: May 2003
Location: Earth
 has been a member for 10 years
Unfortunately, the G7 bolt is a bit longer than the previous generation and is not compatible.
dr.strangelove is offline   Reply With Quote
Old 02-25-2012, 11:21 PM #5
Dilly0509
 
 
Dilly0509's Avatar
 
Join Date: Jan 2012
Location: Indiana
Dilly0509 has achieved Level 1 in PbNation Pursuit
Ah i see. How about this one? Also is this a soft faced bolt as well? Thanks again!
http://www.ansgear.com/Angel_Bolt_As...ltassembly.htm
Dilly0509 is offline   Reply With Quote
Old 02-25-2012, 11:32 PM #6
dr.strangelove
The Angel Eye Doctor
 
dr.strangelove's Avatar
 
Join Date: May 2003
Location: Earth
 has been a member for 10 years
That's the A1 series bolt. That also won't work, I'm afraid. Of the bolts at ANS Gear, only the LCD ones will fit your gun, with the caveats I mentioned before.
dr.strangelove is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump