[Punisher 281]

I've noticed that there is a little gap between the breach and where the barrel starts on my LT. I took the O-ring off the back of the barrel to lessen the gap. Can this gap cause barrel breaks? Even with the O-ring off, there's still a bit, but not nearly as bad as it was.

[levesque45]

no it should not cause any issues what so ever. this is the same in all eteks and egos.

[Punisher 281]

Thanks, and is it recommended that I use an O-ring on the barrel?

[jantje]

Originally Posted by Punisher 281

Thanks, and is it recommended that I use an O-ring on the barrel?

I think if you dont use the oring your barrel may come loose if you shoot your gun.

[Fenix001]

Originally Posted by jantje

I think if you dont use the oring your barrel may come loose if you shoot your gun.

While this may be true, I had the opposite happen with my Pipe. I didn't notice it was missing an o-ring and it was really stuck together. Although, the Pipe's backs and tips are known for getting stuck together. More than usual.

[MrMetal1091]

Originally Posted by Punisher 281

Thanks, and is it recommended that I use an O-ring on the barrel?

the oring on the barrel helps prevent the barrel from vibrating loose due to the vibrations of the gun operating

[mafiakid96]

It should be fine