[dianbrax]

The G3 i have is a 6 dip switch board i have the #5 on and #6off is this the stock setting for the dwell i looked at the manual it said this represented 14 mils is this correct? thanks

[8765]

Originally Posted by dianbrax

The G3 i have is a 6 dip switch board i have the #5 on and #6off is this the stock setting for the dwell i looked at the manual it said this represented 14 mils is this correct? thanks

I'm assuming the rest of your G3 is stock. If so, then yes. You may be able to run it at 12 ms as well, depending on the weather you're playing in.

[firefoxx04]

dp has a manual on there websight.

set it to 12 or 14. you dont need to ever go higher than 14. if you do, something else is wrong

[dianbrax]

thanks guys im assuming the past of least resistance is what i have now and yes i looked at the online manual im just making sure i do it right

[dianbrax]

yes it is stock one more question whats the best way to remove that oring thats placed in the breach?

[marcusgar21]

with a dental pick

[dianbrax]

thank you sir