[PumpChump131]

I have a Factory midblock Karni and a 2k ccm deluxe kit. I was wondering what size pump arm would i need to make the 2k kit fit? I also notice paintballgateway has the 2k5 black magic pump arm with 7.5" length and ccm with a blackmagic 7.64" length. Would either one work?

[Castro #66]

A standard 2k kit will not fit a Karni without modification. You'll need a Karni pump kit, which CCM can help with, but are probably out of stock currently. Give them a call to chek your options with them.

[PumpChump131]

it seems to have a wgp 2k pump kit on it so i figured i just needed a shorter pump arm, but i'll give CCM a call tomorrow.

[vinnydeez]

Ccm is all out of stock of anything karnivor

[Castro #66]

If you already have a pump kit that fits, simply measure the distance between the pump handle and sled, then add about 3/4 inch for threading.

[PaulE2Cocker]

^^^^^^^^^ What he said id listin to him^^^^^

Why is this so hard to figure out people install your pump assembly if you have half/midblock put your bolt and sled on see how long you need rod. cut rod. retap with a die to make your threads then put back together if you cant do something this simple take your gun to a tech and dont touch it or try to take apart...... And definatly dont attempt to halfblock it..

just sell karni to me....