[M0IR]

Ya, will my stock NT11 trigger fit in any other dye guns?

Specifically a DM9 or DM10?

or jsut a Nt10,11 Dm11,12?


AND

Anyone seeing that screwing in your barrel too far cracks your eyepipe? maybe?

would an oring on the barrel fix the problem? I don't know?


Let me know thanks!

[burntolive50]

yeah i use a 20 size o-ring on my barrel and it saves you a little on cracking the eye pipe, also try going down a size on the bolt tip

[SmartWorrPartsPlayer]

Originally Posted by M0IR

Ya, will my stock NT11 trigger fit in any other dye guns?

Specifically a DM9 or DM10?

or jsut a Nt10,11 Dm11,12?

AND

Anyone seeing that screwing in your barrel too far cracks your eyepipe? maybe?

would an oring on the barrel fix the problem? I don't know?

Let me know thanks!

Yes the NT11 Trigger can be installed on any UL or UL2 Frame.

Correction it is a 017 O-ring that you should put on your UL Back, 020 too large.

[DarkRipper]

I haven't had any trouble with cracked eyepipes and I haven't been using orings on my UL backs.

[burntolive50]

My bad on the oring size i was going off memory, i just use the tank reg orings for my barrel backs

[DubEgo]

My buddy's NT kept breaking eye pipes b/c he put orings in it, mine never cracks an,y just don't screw the barrel on too hard, that'll do it every time lol.