[paintballshadow]

Shadow Twice

- one piece barrel
- velvety surface
- made of of high-grade aluminum AW-7075

Length: 14 inches
Control bore: 6,3 inches
Weight: 132 grams
Available in bore size 683. 685. 687. 689 691.
Threads: autococker, ION





Shadow Shake:
- two pieces barrel
- long back
- velvety surface
- front made of polished carbon fiber or aluminum
- fronts can be replaced

Length: 14 inches
Weight (with aluminum front) – 136 grams
Weight (with carbon fiber front) – 94 grams
Control bore: 6,1 inches
Available in bore size 683. 685. 687. 689. 691.
Threads: autococker, ION












Shadow Shake with carbon tip

custom



Shadow SB
- two pieces barrel
- short back
- velvety surface
- front made of polished carbon fiber or aluminum
- fronts can be replaced

Length: 14 inches
Weight (with aluminum front) – 130 grams
Weight (with carbon fiber front) – 58 grams
Available in bore size 683. 685. 687. 689. 691.
Threads: autococker, ION,









Shadow Hybrid

One-piece barrel made of high quality aluminum and extra thick, polished carbon fiber.
Carbon fiber 1.5 mm.
Bore sizes: 683 685 687 689 691.
Threads: AC, ION, A5.
Standard length: 14''







Barrel case:







****************

Finally we have the first prototype! SHADOW TWICE - one piece barrel with long back.

Photos:





What do you think about it?

[georgeyew]

Looks nice. What make it different from other barrels?

[cmdrsuds]

Nasty. great logo. hope you offer lots of different bores. Great job guys

[NJEmortal]

Nice porting, looks like it would be pretty quiet

[paintballshadow]

threads: cocker, spyder, BT/A5, ION, T98
colors: silver, black
other colors - only on request

[DocDriza]

Originally Posted by paintballshadow

threads: cocker, spyder, BT/A5, ION, T98
colors: silver, black
other colors - only on request

When is this coming out, and were can we get them from?

[cmdrsuds]

thats a great price

[tekniqu3]

Control bore size?

[NJEmortal]

Shoot me a PM as soon as I can buy an AC threaded off you!

[paintballshadow]

This barrel is still in the testing phase.
Avaiable in bore size 685, 687, 689.

[SKI008]

Please make some smaller. Like .683 or less

[killer_ghost]

That barrel looks great! I'm also liking the price.

[pbbuddy12]

Looks, pricing, and bores all sound good. Reminds me of a proto back alot.

Get the porting right and will be a killer deal.

[Nashorn]

How long is the control bore? Any pics showing just the back?

The prototype carbon front on your FB page looks sick!

Oh, and you really have to produce something smaller than a .685 even if it is part of a booster kit later on.

[paintballshadow]

The presented picture is a prototype. This post was made to gather your suggestions and eventually get some corrections done.

Considering the size, the barrel is made for the European market, that is why the size is as it is. If there will be more interest in the smaller size, we will surely make one too.

Originally Posted by Nashorn

How long is the control bore? Any pics showing just the back?

The control bore is 160 mm long.
As I said before this is a one piece barrel so do you want me to cut it half to make a photo of a back piece ?

Originally Posted by Nashorn

The prototype carbon front on your FB page looks sick!

We would like to try an another, cheaper method as SLY, Deadlywind and Deathstick used. So we covered the pipe with hydro graphics with a carbonate pattern. You can see the results yourself. In the end we have decided to use the 100% carbone. The picture of the material u can see below.







Unfortunately we don’t have the front ready yet. We will show it once it’s ready.

[pbbuddy12]

If it is a 1 piece why not blend the back into the front. Seems like you could remove some material and shave the weight as well as the look in doing so.

[i_bunker_u]

will definitely be trying these out

[Nashorn]

Originally Posted by paintballshadow

The control bore is 160 mm long.
As I said before this is a one piece barrel so do you want me to cut it half to make a photo of a back piece ?

Sorry, I failed to read that this is a one piece barrel. I just looked at the pic and it looked like a 2-piece barrel based on the larger back section. The prototype pic looks like a Freak Junior barrel. No hacking the barrel to pieces please...lolz.

160mm converts to 6.2992 inches. So, that's a little longer than a Freak insert. If it is a one piece barrel, why not make the control bore longer? PE's 8 inch control bores are phenominal and LAPCO's one piece barrels have control bores going the whole length of the barrel. IMHO, you should consider making this a 2-piece system with long control bores and carbon fiber tips as standard. That would make it stand out and people would buy it.



I certainly don't want to tell you how to run your business - just throwing in my 2 cents.

[TaggRat]

wow that looks great, would look awesome on my Matrix.

[killer_ghost]

Originally Posted by paintballshadow

threads: cocker, spyder, BT/A5, ION, T98
colors: silver, black
other colors - only on request

Originally Posted by TaggRat

wow that looks great, wish it was going to be available in Autococker threads, would look awesome on my Matrix.

.

[TaggRat]

thanks Killer, not sure how I missed it, guess my eyes were faster than my brain. Time to get a new barrel