[Nickdennis]

Can a Sanchez Machine SM-1 be turned into an electronic cocker?

[Castro #66]

Sure, if you want to put the work into doing it. I think someone might have made one already.

[Eudaemon87]

Didn't you post this thread already?
http://www.pbnation.com/showthread.php?t=3716218

[masterofTHUMBS]

You would probably have to find a e-blade frame first, drill the holes for eyes (optional but you are already putting the work in anyway), probably need a new mini front block, need all new pnuematics (lpr, ram, and noid if it didn't come with e-blade), and the stock SM cocking rod will probably need to be cut, drilled and tapped (idk if it is a standard size, maybe able to use a cockrod for a half-block). In addition, if you don't have it already, you will need a reg and ASA.

Altogether, it may just be cheaper (and more worth your time) to find a electronic cocker used somewhere.

[Nickdennis]

Sorry, forgot my bother made that thread a while ago

[Castro #66]

You should really not be sharing your account. It happens to be against the rules.

[Nickdennis]

We dont anymore, he just didnt have a computer a he time and wanted to figure out how to start his new project...now he does have his own account

[joedirt199]

if it is the body style where the front of the body has the hole for the pump rod to go through then you will need to grind that off. it is the style where the front vertical asa has the holes for the pump rod to go through they you just need a new front block with asa. i think they were set up like karnivor front blocks. then pnuematics, vertical asa for a three way rod, frame that accepts three way trigger rod and a shorted half blocked length rod for the ram. it could be done just depends on the sanchez body.