Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 08-19-2013, 09:12 PM #1
prodigy08's Avatar
Join Date: Jun 2012
Help a1

I just got this angel a1. Its all stock as far as i know. The person before me was using lp but i only have hp. I know the a1 will run off of hp so i tried it just to see if it would shoot or even hold air. It started leaking from what i think is the ram or inside there. At first i thought it was over pressurized so i backed out the velo screw and turned it up slowly but it sill leaks. If i take out the bolt the ram will go forward and stay , but if the bolts in it stays back. Please some one help. i know its been a few years..
prodigy08 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 05-23-2014, 07:59 PM #2
Join Date: Mar 2007
 has been a member for 10 years
If you have leaking when the ram is fully back then it's the Ram. You will need a new ram or, send out the old one to be rebuilt.
panther75mm is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump