Billy Wing Upgrades

pmrballerx21 · 02-09-2012, 10:39 AM

once you have your gun modded are you able to change out bolt inserts and shot chamber inserts and adjust the reg to lower the fps to play reball or is it better to just leave it once you get it back

amofop · 02-09-2012, 10:51 AM

I wouldn't touch the bolt tip insert Cus he mods that. But you can change the bolt spacer.

BWing21 · 02-10-2012, 08:24 AM

yeah, for dropping your FPS to shoot reball or to play indoor all you need to do is use teh bolt volume spacers. I woudl leave the tip insert alone.

sosca · 02-12-2012, 09:54 PM

SENDING MINE IN TOMORROW!!!! Can't wait to get it back

General Cole · 02-12-2012, 11:16 PM

@BWing21- I took the NT out Saturday at our NCPA event and after about two pods the gun went down and wouldn't cycle. It was the first time it was even aired up since I got it back. The solenoid would cycle, but the bolt wouldn't move in the slightest.

ZerOxShadows · 02-12-2012, 11:17 PM

You couldn't just PM him that?

General Cole · 02-12-2012, 11:21 PM

I didn't know if anyone else had had a similar issue, so I figured I'd bring it up in an area where it can be solved for the benefit of the community. I love the service he provided, not bashing that, but it may be common (I don't know otherwise).

Blusylver · 02-12-2012, 11:21 PM

Quote:

Originally Posted by ZerOxShadows

You couldn't just PM him that?

LOL, u took the words right out of my mouth

notsumkid · 02-13-2012, 09:31 AM

Gave him my Nt11 yesterday to have him BWing it. Cant wait to get it back and shoot it very friendly guy! He was out at cfps 1 with rocky helping everyone out fixing guns and answering questions.

smartpartz_kid · 02-16-2012, 06:40 PM

just facebooked him

Paint_hore · 02-17-2012, 05:31 AM

oh sweet thanks for letting us know.

smartpartz_kid · 02-17-2012, 08:56 AM

Quote:

Originally Posted by Paint_hore

oh sweet thanks for letting us know.

thanks for letting me know you are interested

...just tryin to get my posts in

DarkRipper · 02-17-2012, 09:07 AM

This is what happens when the site makes it an achievement to get 5k posts, or top 100 posters... etc.

I've decided to hold off for now on the BW work. My NT is running really well at the moment.

smartpartz_kid · 02-17-2012, 11:46 AM

Quote:

Originally Posted by DarkRipper

This is what happens when the site makes it an achievement to get 5k posts, or top 100 posters... etc.

I've decided to hold off for now on the BW work. My NT is running really well at the moment.

true^

i was gunna wait until someone got theirs back to tell me how it was, then ill make the decision.

Blusylver · 02-17-2012, 12:31 PM

So the 7 other people who all love his work isn't enough? Ill send mine in once I hear good results from 9 people, just to be safe

smartpartz_kid · 02-17-2012, 12:36 PM

Quote:

Originally Posted by Blusylver

So the 7 other people who all love his work isn't enough? Ill send mine in once I hear good results from 9 people, just to be safe

oh snap i need to read this thread more carefully lol sorry dudes

General Cole · 02-17-2012, 06:44 PM

Update- Billy got back to me and got the problem all solved. Thanks again Billy!

MorpheusX · 02-17-2012, 08:54 PM

this would typically be the point where you explained what was going on with the particular marker and subsequently how the issue was solved, therefore aiding others who may run into a similar problem.

Xal · 02-18-2012, 12:55 AM

I messaged Billy on Facebook and I was just wondering if he's still doing this or if he's too busy right now since he hasn't gotten back to me yet.

burntolive50 · 02-18-2012, 01:26 AM

I messaged him about a month ago no reply. Hes a busy guy though for sure

melkus · 02-22-2012, 01:56 PM

Billy to do those upgrades does it matter what board you have? And also would be nice to know estimated cost? Thanks