Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 08-07-2011, 05:27 PM #1
Djurberg-Milsig
 
 
Djurberg-Milsig's Avatar
 
Join Date: Aug 2011
Location: Norrtälje, SWEDEN
Milsig SCAR, D-Series mod project

This is my Milsig SCAR, D-Series mod project.
Took overall around a week to complete the first version(s), allot of hard work and a few late hours but a great time as well!

The SCAR hull is in black hardened plastic from the cheapest airsoft JLS, SCAR (I think i was).
-Holographic sight and an AN/PEQ-15 GREEN Laser with Flashlight in one, standart single shot pistol grip.
-RAP4 riffled 16" barrel with flash-hinder.
-Standard mag fed Milsig K-series marker.
-----------------------------------------------------------------------------------------------------

All I really did was to cut out all internal parts that wasn't flat and striped/ weared down my all new milsig marker the same day I got it, using an abrasive tool
Cut a little here and a little there to get i to fit over the marker, cut out some areas in the plastic hull etcetera.
Used the upper same screws that attaches the barrels barrel block and the back sling mount end cap. Just drilled the holes in the airsoft hull, got better than expected really.
After quite allot of stripping on the markers outside hull as well on the upper marker rail it fitted like a charm. I had to cut the cocking handle a few centimeters (or more like one perhaps) to get the airsoft hull over the marker, then used the airsoft standard charging handle still fitted on the airsoft hull to pull back the markers...
I think that's all, wasn't as easy as it sounds now but still no big issues during construction, you just need the time and patience as most of you may know I guess
oh yes, I attached the front hand-guard lower rail to the markers lower front rail (witch obviously was in line with the marker, I cud the out the special areas from the plastic hull after this position) using the back sight including with the airsoft after cutting this one down a bit as well I also had to cut out and strip down the mag feed breach cover ALLOT (!) to get it between the marker and the airsoft hull, but in the end it was possible
I then had to glue it on to the marker to stay in correct position.
Also cut out the front sight lower part witch attached it to the airsoft barrel mounting where I needed my own barrel to be, might be some other parts as well which I forgotten right now,
there where allot och cutting and striping as you understand.

But in the end I´m very satisfied!

At last I cut down the standard stock mounting part/ position from the back end off the airsoft hull tho it went broken after just a few games and I had to fit the stock right on to the markers sling mount end cap fast with once again allot off work as usual.


-So here are some screens off my Milsig SCAR, D-Series (witch stands for Djurberg modding Series btw) :

First version.
-----------------------------------------------------------------------------------------------------


Second version with my old a little to long 20" barrel from smartparts attached with RAP4 barrel threaded adapter.
-----------------------------------------------------------------------------------------------------


Second version with my old a little to long 20" barrel from smartparts attached with RAP4 barrel threaded adapter.
-----------------------------------------------------------------------------------------------------


Second version with my old a little to long 20" barrel from smartparts attached with RAP4 barrel threaded adapter.
-----------------------------------------------------------------------------------------------------


Final and current version with the fixed reattached stock.
-----------------------------------------------------------------------------------------------------


Final and current version with the fixed reattached stock.
-----------------------------------------------------------------------------------------------------


Milsig SCAR, D-Series in Action!
-----------------------------------------------------------------------------------------------------


Milsig SCAR, D-Series in Action!
-----------------------------------------------------------------------------------------------------




Construction pictures are on the way...

Anyway here is the latest video from the Nodsta TACTICAL Paintball group in Sweden, Nodsta. Approximately 05:35 min in it enters the battle:
http://www.youtube.com/watch?v=zV0OaFnctN8






-Keep on Rocking!
SAW 249 mag-fed/ boxmag (hopefully home made (any suggestions of tutorials on this?) project coming up this winter...
__________________
-LETS ROOOOLL!

Last edited by Djurberg-Milsig : 08-18-2011 at 05:23 PM.
Djurberg-Milsig is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 08-09-2011, 03:37 PM #2
jonotwist
fistfull o'sunshine & joy
 
jonotwist's Avatar
 
Join Date: Sep 2006
Location: NE ohio
Annual Supporting Member
jonotwist plays in the APPA D5 division
jonotwist is one of the top 500 posters on PbNation
jonotwist supports Empire
sooo, what gun was this originally?
__________________
Speak, if you're worth the listening
vintage old feedback High Tech Shiny Feedback

Breakout Actions Sports Wenies Buy Elsewhere
jonotwist is online now   Reply With Quote
Old 08-09-2011, 03:55 PM #3
masterofTHUMBS
boom headshot
 
masterofTHUMBS's Avatar
 
Join Date: May 2007
Location: 703
masterofTHUMBS posts videos on PbNation
masterofTHUMBS is an NCPA player
masterofTHUMBS supports Pev's Paintball
masterofTHUMBS plays in the APPA D5 division
Quote:
Originally Posted by jonotwist View Post
sooo, what gun was this originally?
Quote:
Originally Posted by Djurberg-Milsig View Post
-Standard mag fed Milsig K-series marker.
read the post.

Pretty cool. Does it have an egrip or is it still mech?

Last edited by masterofTHUMBS : 08-09-2011 at 04:01 PM.
masterofTHUMBS is offline   Reply With Quote
Old 08-09-2011, 10:58 PM #4
jonotwist
fistfull o'sunshine & joy
 
jonotwist's Avatar
 
Join Date: Sep 2006
Location: NE ohio
Annual Supporting Member
jonotwist plays in the APPA D5 division
jonotwist is one of the top 500 posters on PbNation
jonotwist supports Empire
Quote:
Originally Posted by masterofTHUMBS View Post
read the post.

Pretty cool. Does it have an egrip or is it still mech?
lol i was originally thinking that was some kind of airsoft setup.

shows i need to pay a little more attention to the milsim guys]

looks cool. the scar is my favorite rifle that sees media attention.
its also comfy to shoot.
__________________
Speak, if you're worth the listening
vintage old feedback High Tech Shiny Feedback

Breakout Actions Sports Wenies Buy Elsewhere
jonotwist is online now   Reply With Quote
Old 08-13-2011, 07:54 AM #5
Djurberg-Milsig
 
 
Djurberg-Milsig's Avatar
 
Join Date: Aug 2011
Location: Norrtälje, SWEDEN
Quote:
Originally Posted by masterofTHUMBS View Post
read the post.

Pretty cool. Does it have an egrip or is it still mech?
Its the standard single shot grip, because of the mag fed I didnt felt I needed an e grip at the moment anyway.


Quote:
Originally Posted by jonotwist View Post
lol i was originally thinking that was some kind of airsoft setup.

shows i need to pay a little more attention to the milsim guys]

looks cool. the scar is my favorite rifle that sees media attention.
its also comfy to shoot.
Haven shot with the SCAR live myself, is that what you mean?
__________________
-LETS ROOOOLL!
Djurberg-Milsig is offline   Reply With Quote
Old 12-05-2011, 04:29 PM #6
manknuckle
 
 
Join Date: Dec 2011
Very nice, I heard Milsig parts are very easily damaged is it true? Like you have to do a lot of custom fitting for it. (love your rifle)
manknuckle is offline   Reply With Quote
Old 12-06-2011, 07:45 PM #7
jonotwist
fistfull o'sunshine & joy
 
jonotwist's Avatar
 
Join Date: Sep 2006
Location: NE ohio
Annual Supporting Member
jonotwist plays in the APPA D5 division
jonotwist is one of the top 500 posters on PbNation
jonotwist supports Empire
Quote:
Originally Posted by Djurberg-Milsig View Post


Haven shot with the SCAR live myself, is that what you mean?
yes. also shouldering it, not just shooting it.
__________________
Speak, if you're worth the listening
vintage old feedback High Tech Shiny Feedback

Breakout Actions Sports Wenies Buy Elsewhere
jonotwist is online now   Reply With Quote
Old 10-21-2012, 02:06 PM #8
Bergy's
 
 
Bergy's's Avatar
 
Join Date: Oct 2012
Location: Montreal
very nice !!1
Bergy's is offline   Reply With Quote
Old 12-28-2012, 11:36 AM #9
D_Bowie
 
 
Join Date: Dec 2012
looks great !!!
D_Bowie is offline   Reply With Quote
Old 01-05-2013, 03:12 AM #10
Nemesis97
 
 
Join Date: Jan 2013
Awesome, very nice gun!
Nemesis97 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump