[Silent Fate]

ok well short story is that my nt will not cycle so far i have
changed battery
changed orings on the spool as well as the spring
changed the E (front oring) on the plunger
and i have raised the dwell
and relubed bolt and spool

i would love some help at this as i am out of ideas and ya i am prob a scrub and missed something supper easy so please correct me

thanks guys

[wesr]

It won't cycle at all or it just goes poof?
Have you made sure your solenoid "clicks" with no air? To make sure it is working
A dried out spool can cause it to just go poof

[Silent Fate]

Poof and bolt does not move

[wesr]

Try relubing your spool and the rest of the bolt while your at it

[Silent Fate]

ya forgot to mention that i did that as well

[wesr]

Whats your reg set at? You said you raised your dwell why is it set at? What kind of temps are you playing at?

[Silent Fate]

Georgia so its hot not sure what reg pressure are and thedwell was raised cuz of the temps being crazy these past weekends but I returned the dwell when it did fix the issue

[Blusylver]

I lower my dwell when its hot and raise it when its cold. I know that won't fix the fact that its not cycling.

[Silent Fate]

Ya and all setting inside of gun are stock

[wesr]

Try turning your hpr all the way down, the open it up and cycle the marker as you open your hpr.... At this point if none of this has helped it may be your noid... Contact dye maybe if you can

[Silent Fate]

I will try you really think it could be my noid

[wesr]

Well all those other things we suggested and you tried haven't worked so... Process of elimination... But I would talk to a dye tech if you can call them

[Stewylouie]

If resetting the reg doesn't work, try cleaning your noid manifold. Sometimes gunk can clog the passages.

[Silent Fate]

Will do and ya I will prob call today or tomorrow

[Silent Fate]

could it be my tank i am using a ga tank with g2 reg

[SmartWorrPartsPlayer]

Originally Posted by Silent Fate

could it be my tank i am using a ga tank with g2 reg

I don't think it's your tank unless you have messed with the internals in your G2.

I would try another tank if you really want to eliminate the possibility.

I also use a 70ci/4.5K GA with a G2 Reg without issue.

[Silent Fate]

ya i tried a crossy and got nothing

[SmartWorrPartsPlayer]

Try setting the Dwell @ 8-9ms and see if you can get the Bolt to cycle.

[Silent Fate]

ok i will give it a shot and let you know

[Silent Fate]

just tried it and got nothing

[SmartWorrPartsPlayer]

Ok.
Have you messed with your shim stack at all?