The stock 7th Element solenoid is NOT rated for the higher operating pressure.
How you can fix this (how I did, anyway) is to pull the solenoid off the stock board and put it on the new one. It fixed my consistency issues (until I had to service my reg).
You may call it fat, I call it bounce padding.
If I say "the safety frame claim is bull****" I'm not ripping on PE, the SL8R is my favorite gun EVER. If I say "DMs are overpriced" it doesn't mean Dye is a bad company, I want an NT11 in the worst way.
However, when I say "The Vapor is overpriced and not very good" I mean it. I won't have one unless it's cheaper than what I can get a G5 or Proton for or free.