[crazy baller55]

So I just installed a blackheart board into my sft shocker. When I first installed it, it worked fine. Now everytime I plug in the battery it just turns itself on and blinks constantly, it won't let me use the power switch either. I checked out ZDSPB and attempted what they said to do, no luck. I have a parker solenoid if thats relevant at all. I'm just wondering if it is a short in my board possibly. I know this may be kind of hard to diagnose without seeing the board and the solenoid but any suggestions will help. Thanks in advance.

This is what ZDSPB suggested:
"Shocker turns on as soon as the battery/wire harness is plugged in, and the power switch doesn't work.
· Check the pins inside the connectors for the wire harness on both boards. Most likely the pins are bent and coming in contact with one-another. See Board Damage at the bottom of the page.
· Check the wire harness for any paint splatter. This may cause a jump in the circuit and exhibit a problem."

[Uziel Gal]

Any screw damage to the upper board?

[crazy baller55]

Originally Posted by Uziel Gal

Any screw damage to the upper board?

Nope no damage. Now there is a different problem.... the board won't even turn on

I'm thinking it may have something to do with the wiring harness.

Edit: I feel like a dummy. I didn't notice that the negative wire on my battery harness broke but was just hanging on by rubber... So I know where i need to start now .....