Originally Posted by abcito
Seventh Element responded and I have updated the post
Thank you "abcito" for starting this thread!
We at SE would very much like to produce a board that will fit the entire line of Angel products.
Now, with that said, I have personally seen and still have my Speed 05 so getting the dimesion off the Speed 05 will be easy. But I do not have the earlier models such as "IR3, Speed, A4, A4 fly, LCD, and G7"
"Uziel" from PBN was nice enough to send me the "Predator V3 Board" manual. Looking at the manual, if one of you out there with LCD board can send the board to me (a stock board will do) I can go ahead and obtain the measurement from there!
Also "Heaton" said he/she has the UN1 IR3 board. If you can send the board to me, then I can complete the upper (LCD), Lower (my Speed 05) and the rest (from Heaton's UN1) measurements.
If you are interested in assisting with this project (send the boards described above), please contact me via email at firstname.lastname@example.org
I think the natural progression should be to start with a LED based programming board and then produce the Pathfinder Board (OLED) with a custom grip.
This will be fun!