[zyxin]

Does anyone get the demon to shoot reballs consistent? Mine does not..

Any settings or other tips?

[SHOOTNPOO]

Whats it doing?
Is it fps or feed rate?

[zyxin]

Originally Posted by SHOOTNPOO

Whats it doing?
Is it fps or feed rate?

As it start to ramp, its like its starving. "Slow-semi" is ok, fps is around 250. BPS is 10,4. The guns is brand new and not broken in, all settings are "out of the box" except the HPR. I relubed the marker with DOW55 instead of the green stuff that came with it.

[SHOOTNPOO]

What are your settings. Sounds like your settings are off.

[MstrKey]

Maybe needs a higher dwell to compensate for the odd shaped sticky reballs?

[zyxin]

Originally Posted by SHOOTNPOO

What are your settings. Sounds like your settings are off.

Dwell - 15.5
Debounce - 5.0
Eye delay - 3.0
Eye sens - 10
Bolt delay - 8.0
Clearing shot - on
FSDO time - 200
FSDO dwell - 5.0
Loader pulse - 20

[SHOOTNPOO]

Originally Posted by zyxin

Dwell - 15.5
Debounce - 5.0
Eye delay - 3.0
Eye sens - 10
Bolt delay - 8.0
Clearing shot - on
FSDO time - 200
FSDO dwell - 5.0
Loader pulse - 20

Try these
Dwell 15.00
Debounce 3.0
Eye delay 3.0
Eye senc 15.0
Bolt delay 8.0
Clearing shot on
Fsdo time. 10sec
Fsdo dwell 1.5- 2.0
Loader pulse 20

Tank out put 450-800
Dont use any lower psi tank output.
Also make sure your on/off knob is not shutting off flow of air supply.
How many turns out on hpr reg are you at?

Are you located in the UK, US or Canada?

[zyxin]

Seems to work better, but im getting low on air. Ill tell you as soon as i get my tanks filled.

[MstrKey]

Originally Posted by zyxin

Seems to work better, but im getting low on air. Ill tell you as soon as i get my tanks filled.

You know most of the time when people have trouble with reballs it's the hopper, not the gun. They're malformed, dirty and some of the cheaper brands are a heavy sticky rubber. Hoppers tend to feed inconsistently with reballs a lot of the time.

If you still have problems try to lube the reballs up a bit before you use them. Some people lube them with paint from a broken ball, some use dish soap and water, some use actual oil. I'm not sure which is the best but I've personally used water with a bit of dish soap successfully. You don't want them dripping.......just moist.

[MrFreece]

or even silicone spray. Leaves nice marks on the lenses

Will try the settings when my gun gets back