Next time Search...it is a really useful feature, but I will do this one more time.
You don't have an LPR, but you can tune it the best you can.
-Red Bolt Tip (If you have it)
-Green Bolt Insert (Also if you have it)
-No Spacers at ALL!
For the NT11:
Four Recommended Settings.
1. Super smooth – lowest recoil, quiet, shoot the most fragile paint
a. Green bolt tip insert, no spacer insert
b. Operating pressure approximately 110psi
c. Efficiency: 1200-1300 shots off a 68/4500 tank
2. Stock settings from factory – balance of all performance features
a. Red bolt tip insert, no spacer insert
b. Operating pressure approximately 120psi
c. Efficiency: approximately 1400 shots off a 68/4500 tank
3. Efficiency one – better efficiency, still well balanced performance
a. Red bolt tip insert, green spacer insert
b. Operating pressure approximately 130psi
c. Efficiency: approximately 1500 shots off a 68/4500 tank
4. Efficiency two – ultimate spool valve efficiency
a. Red, or blue bolt tip insert, yellow spacer insert
b. Operating pressure approximately 140psi
c. Efficiency: 1600-1700 shots off a 68/4500 tank
Last edited by SmartWorrPartsPlayer : 12-09-2011 at 05:44 PM.