creed trigger problems.

ethan levy · 12-02-2011, 12:03 PM

Hi,

I picked up my creed the other day and realised the trigger seems to be kind of stiff and it returns really slowly after you pull it... i took the grip frame off to see if there was anything that might be causing it but the trigger worked fine when i took the grip frame off but starts going stiff and slow when i put the frame back on...

I was wondering if you had any ideas or suggestions what to do?

Cheers Ethan

Sick420 · 12-02-2011, 01:24 PM

Are your sure the solenoid or eye wire isn't causing the problem

SHOOTNPOO · 12-02-2011, 01:58 PM

Sounds like the eye wires are in the way or pinching behind the trigger.

Reaper (ACI) · 12-02-2011, 02:13 PM

Either the eye/solenoid wires, or check the screws in the trigger shoe. Back them out a tiny bit and see if that frees the trigger up.

ethan levy · 12-03-2011, 05:05 PM

i just loosened off the screws that hold the trigger in inside the top of the grip frame and it seems to be working fine now... cheers for the help though

MstrKey · 12-07-2011, 03:04 PM

Quote:

Originally Posted by ethan levy

i just loosened off the screws that hold the trigger in inside the top of the grip frame and it seems to be working fine now... cheers for the help though

Good that you got it fixed but you still may be pinching wires. I'd give it a lookover to be sure. Loosening the screw may be working, but may not be solving the issue.