[ncstatered21]

Of course there was no chrono at the field today. It was broken. So I don't know what I was shooting at. I had a lot of kick but not sure if it was cause shooting hot. NEED CHRONOOOOO

[SNAKESNIPER (Banned)]

No chrono is a no-no.

[ncstatered21]

Originally Posted by SNAKESNIPER

No chrono is a no-no.

Yeah it sucked but everyone had their stuff pretty well setup. Said it broke earlier in the day. Didn't seem like anyone was shooting hot either...

[spork801]

Just got my power pack order in today so I thought I'd check in. Will be able to chrono and test everything out on Wednesday.

Needed to use a tank oring for the spacer as the included oring was far too small to install onto the guide. No big deal, I had a bunch on hand.

There was a spring included with my kit. I was under the impression that the stock spring was recommended for use with the Lurker bolt...is this something new to test out as well?

Looking forward to testing things out.

[SNAKESNIPER (Banned)]

Lurker springs? Interesting....

[ncstatered21]

Originally Posted by spork801

Just got my power pack order in today so I thought I'd check in. Will be able to chrono and test everything out on Wednesday.

Needed to use a tank oring for the spacer as the included oring was far too small to install onto the guide. No big deal, I had a bunch on hand.

There was a spring included with my kit. I was under the impression that the stock spring was recommended for use with the Lurker bolt...is this something new to test out as well?

Looking forward to testing things out.

Whattttttt???? A spring? Did u put the tank oring on the inner part of the spacer?

[Lurker27]

We still recommend stock, but I had them and people seem to like the options so I figured why not? Some people prefer going for the super low pressures.

[spork801]

Originally Posted by ncstatered21

Whattttttt???? A spring? Did u put the tank oring on the inner part of the spacer?

Yes and yes.

Originally Posted by Lurker27

We still recommend stock, but I had them and people seem to like the options so I figured why not? Some people prefer going for the super low pressures.

Neato. I'll try them both out.

[SNAKESNIPER (Banned)]

Originally Posted by Lurker27

We still recommend stock, but I had them and people seem to like the options so I figured why not? Some people prefer going for the super low pressures.

Does this new spring have more or less tension than the stock one? More info please!

[spork801]

Originally Posted by SNAKESNIPER

Does this new spring have more or less tension than the stock one? More info please!

Feels like more.

[ncstatered21]

Originally Posted by spork801

Yes and yes.



Neato. I'll try them both out.

What size on the tank oring? Or are all tank orings the same size? May try it out.

[spork801]

Originally Posted by ncstatered21

What size on the tank oring? Or are all tank orings the same size? May try it out.

All the same size AFAIK.

[ncstatered21]

Originally Posted by spork801

All the same size AFAIK.

Thank you. I believe I have one lying around.

[bengal175]

when you do the poppet polishing do I remove the oring befroe I polish or leave it on during the polishing. just checking before I go ahead and try this. thanks and I love the bolt in my axe.

[Axed]

Thanks for the speedy delivery of my Power Pack! Can't wait to get out there and use it.

I received that extra white o ring/spacer with my order. I'm wonder how to use it properly. The pic that Lurker posted shows what looks like Spring > White o ring/spacer > rubber o ring then the rest of the bolt. The manual for installing the bolt it doesn't show or say anything about putting a o ring in between where the spring meets the bolt. How should this properly be assembled?

Manual I used: http://www.lurkerpb.com/manuals/minimanual.pdf

Thanks!

[ncstatered21]

Originally Posted by Axed

Thanks for the speedy delivery of my Power Pack! Can't wait to get out there and use it.

I received that extra white o ring/spacer with my order. I'm wonder how to use it properly. The pic that Lurker posted shows what looks like Spring > White o ring/spacer > rubber o ring then the rest of the bolt. The manual for installing the bolt it doesn't show or say anything about putting a o ring in between where the spring meets the bolt. How should this properly be assembled?

Manual I used: http://www.lurkerpb.com/manuals/minimanual.pdf

Thanks!

I believe you take your bolt and slide the rubber oring to the bottom. Then you put on the white teflon ring on top of that. Then put your spring on top of both those rings. Then install the bolt as you normally would.

[SNAKESNIPER (Banned)]

Originally Posted by bengal175

when you do the poppet polishing do I remove the oring befroe I polish or leave it on during the polishing. just checking before I go ahead and try this. thanks and I love the bolt in my axe.

Remove the o-ring before polishing the poppet, and re-install it after you've cleaned off all the metal polisher.

[bengal175]

thanks snakesniper for your reply. I will be doing this tonight.

[trillistjay]

I run my gun at 120 psi. It works perfect and it's very quiet. Amazing product.

[JamWade]

my bolt didnt come with an oring big enough to fit around the outside of the bolt but did come with the white spacer am i only supposed to use the spacer between the bolt and spring?

[ncstatered21]

Originally Posted by JamWade

my bolt didnt come with an oring big enough to fit around the outside of the bolt but did come with the white spacer am i only supposed to use the spacer between the bolt and spring?

Suppose to slide rubber oring down onto outside of bolt. If the oring isn't big enough you should be able to just stretch it over it. Then put teflon ring on there and finally the bolt spring.