Originally Posted by steve's account
I usually set my dwell to stock though before I start tuning. Is there a guide on how to set it with eigenrings?
Starting from a shooting setup:
1. lower LPR to desired level (for smoothness etc. if it's good where it is, just leave it.
2. Lower dwell until the consistency is not as good or bolt stick creep in, then put a point back in.
3. If you couldn't get to 16 or lower, then you either need a looser bolt (bad oring fit or lube) or you can bump the LPR a hair.
HPR is set last to get the desired velocity in all cases.